Created with Sketch. Created with Sketch.

Shop by Category

Fuel Management

  • Carbon Fiber Style Hat, Long 1/24

    A round 3-hole hat that is typically seen in carbon fiber. This is a long version.  A shorter version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

    $5.00
    Add to Cart
  • Carb - Terminator 1100 w/ Solenoids 1/25

    One 1100 cfm carburetor with two NOS solenoids. Photo above shows the carb mounted on a manifold which is not included. The solenoids are separate pieces and can be used in any NOS setup.   Three pieces, resin, by VCG Resins, 1/25 scale.  ...

    $2.00
    Add to Cart
  • 4-Hole Carbon Fiber Hat 1/25

    A 4-Hole compact Injector Hat.  This is slightly raised and has 4 square butterflies. Molded in one piece. Contains 1 resin hat.

    $5.00
    Add to Cart
  • PSI Blower 1/25

    A PSI Blower in one-piece resin.For a 'roots' type blower, see the Kalbelco series of 671, 1471 and 1671 super chargers. This is a standalone blower - pulleys or other components are not included. Contains 1 resin blower by Competition Resins, 1/25 scale.

    $5.00
    Add to Cart
  • Carbon Fiber Style Hat, Short 1/24

    A round 3-hole hat that is typically seen in carbon fiber. This is a short version.  A longer version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

    $5.00
    Add to Cart
  • Cross-Ram Manifold & Carbs 1/25

    A cross-ram & carburetor package.All items have locating pins for easy alignment. Consistis of: 1 Cross-Ram manifold 2 4bbl carbs 1 Air cleaner   1/25 scale by Competition Resins

    $8.50
    Add to Cart
  • Enderle Hat 1/25

    A 3-hole late model Enderle injection hat.Molded in one piece. Contains 1 resin hat, 1/25 scale, by Competition Resins.

    $5.00
    Add to Cart
  • Soft Line-Hose-Release Cable .014", .35mm OD

    This is my smallest soft line.  It's nylon coated stainless steel which can be tightly bent and it can hold its shape if bent tight enough. I've used it for a parachute-release cable fromt the cockpit parachute release lever to the parachute and it...

    $2.50
    Add to Cart
  • Brake, Nitrous or Fuel Line .010, .25mm Dia

    This solid aluminum line is the smallest available.  It's soft to bend and will not kink, even at tight angles. It straightens out easily and will conform to any shape you want.This aluminum 'hard' line equals the following equivalent 1:1 size at...

    $2.25
    Add to Cart
  • 1471 Kobelco Blower with Blanket 1/25

    A Kobelco 1471 Blower with a restraint blanket molded in.Made in one piece.This a blower only - pulleys or other components are not included. Check out this photo for an idea of which blower you need. Contains 1 resin blower.

    $5.00
    Add to Cart
  • Dual Nitrous , O2, Fire or Air Bottle Pair 1/25

    Here are a pair of bottles that can be used for nitrous, fire, compressed air, oxygen, etc. Mount them in the interior, at the rear or ahead of the engine. Add a NOS decal found here, if this is the intended use for these bottles.  The 'small'...

    $4.50
    Add to Cart
  • 1471 Kobelco Blower 1/25

    A 1471 Kobelco Blower in one-piece resin.The detail is quite good and the bolts are sharp. This is a standalone blower - pulleys or other components are not included. Check out this photo for an idea of which blower you need. Contains 1 resin blower.

    $5.00
    Add to Cart
  • Make AN Fittings with Pro Tech items

    Make AN Fittings with Pro Tech items

    Make your own AN fittings using Pro Tech's aluminum Hex Fittings. This is not a product, but a tutorial on how to make AN fittings to go with Pro Tech's Braided Lines. For a realistic anodized appearance on these aluminum fitting, use Duplicolor Anodized...

    $0.00
  • Soft Line - Hose .020", .5mm OD

    This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/2"1/16 scale = 1/4" or 5/16"1/12 scale =1/4"1/8 scale  = 1/8"Typical uses are small oil, vacuum and fuel lines, especially fuel & nitrous delivery at the the...

    $2.25
    Add to Cart
  • Fuel or Brake Hard Line .020, .52mm Dia

    This solid aluminum line is soft to bend and will not kink, even at tight angles. It straightens out easily and will conform to any shape you want.This aluminum 'hard' line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/2"1/16...

    $2.25
    Add to Cart
  • Barry Grant DEMON 4bbl Carburetor 1/25

    Barry Grant DEMON 4bbl Carburetor 1/25

    Detailed Barry Grant 4-bbl Carburetor.With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING).Photo shows a real Demon carb for reference only. Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the...

    $2.50
    Add to Cart
  • Tee Fitting, Large

    This is a large inline fitting for braided lines, hard lines or hoses.  Anywhere you have a split.Typical uses are dual feed carburetors, tunnel ram, oil lines and brake lines.Use Pro Tech .035 Braided Line and matching Fittings. Each package...

    $2.00
    Add to Cart
  • Tee Fitting, Small

    This is an inline fitting for braided lines, hard lines or hoses.Typical uses are splits for carburetor fuel lines and brake lines.Use Pro Tech .025 Braided Line and matching Fittings. Each package contains one T fitting, by Pro Tech. Metal Cast

    $2.00
    Add to Cart
  • Fuel Junction Block 1/25

    For your single or dual carburetor setups where the fuel lines split.  Made with molded-on fittings.Use .025 Braided Lines and Fittings. You can also add a small T fitting.                    ...

    $2.50
    Add to Cart
  • Throttle Linkage Photo Etched 1/25

    Photoetched pieces to detail your throttle linkage.Can also use some of the pieces for parallel spring shackles, brackets and other linkages. By Pro Tech.

    $5.75
    Add to Cart
  • A larger air cleaner shown with an additional fine mesh screen as an example.

    Round 4" Aluminum (Nostalgia Style) Air Cleaner 1/25

    This machined aluminum air cleaner measures 4"w x 2"h. It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. The photo shows a 14" air cleaner with an added fine mesh screen available here,...

    $6.75
    Add to Cart
  • Shown with additional fine mesh screen installed.

    Round 14" Aluminum (Edelbrock Style) Air Cleaner 1/25

    This machined aluminum air cleaner measures 14"w x 3"h. It would be typically be found on a single carburetor. Modeled after an Edelbrock air cleaner.Includes photoetched wing nut and simulated filter element.The photo shows a 14" air cleaner with an...

    $7.75
    Add to Cart
  • A larger air cleaner shown with an additional fine mesh screen.

    Round 9" Aluminum (Edelbrock Style) Air Cleaner 1/25

    This machined aluminum air cleaner measures 9"w x 2"h. It would be typically be found on a single carburetor. Modeled after an Edelbrock air cleaner.Includes photoetched wing nut and simulated filter element. This photo shows a 14" air cleaner with an...

    $6.75
    Add to Cart
  • Shown with additional fine mesh screen installed.

    Round 14" Aluminum (Custom Style) Air Cleaner 1/25

    This machined aluminum air cleaner is equal to a real world 14" w x 3" h.  It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. The actual diameter is .56" or 14.2 mm. Photo of this air...

    $7.75
    Add to Cart
  • Holley Dominator 4bbl Carburetor 1/25

    Holley Dominator 4bbl Carburetor 1/25

    Detailed Holly Dominator 4-bbl Carburetor. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting. One per package...

    $2.50
    Add to Cart
  • Rubber Fuel Line (solid core) 1/25

    This line can be used for fuel, oil, water or other transfer hoses.It has a solid copper core to hold its shape.Use hex fittings sized at .025".Each package contains one coil .024" x 3', color black, by Pro Tech.

    $3.75
    Add to Cart