This is the front section which bolts up to the bellhousing. This includes 1st and 2nd gears. Additional gears and reverse are purchased separately.
A 'front section' is required for all tranny configurations listed below.
Included with this tranny section is both the manual shifting lever and the air shifting pod, so you can build it with either configuration (see the two different exploded photos below plus the 1:1 image of the manual shift version).
Here are the different transmission configurations:
1) A two speed unit requires only the front Lenco section and the reversing unit
2) A three speed unit requires a front section, one middle section, and one reversing unit
3) A four speed unit requires a front section, two middle sections, and one reversing unit
4) A five speed unit requires a front section, three middle sections, and one reversing unit
This is a real 4-speed Lenco showing the air pod shifters. Note the push-button shifting and air line routing.
Check out the photo etched Lenco shifter lever set by Futirattraction. Completed linkage shown on 1/25 scale Lenco for reference.
One 3D-printed piece made of Ultra Frosted Detail, by TDR, 1/16 Scale