Pro Tech 1/16 Scale

Braided Line .025 Dia

Depending on your scale, typical uses are fuel, nitrous, oil lines, small heater and coolant hoses and other small transfer lines.The scale size is determined by its outside diameter (OD) compared to real world braided line since an inside diameter isn't...

Braided Line .035 Dia

This .035 diameter braided line equals a scale equivalent 1:1 size of:1/25 scale - 3/4" or -12 AN larger fuel or oil lines.1/16 scale - 3/8" or -6 AN - typically used for smaller fuel or oil plumbing. 1/12 scale - 1/4" or -4 AN...

Braided Line .045" Dia

This .045 diameter braided line equals a 1:1 size of:1/25 scale - 1" or -16 AN used for larger fuel or oil lines, larger water transfer lines1/16 scale - 1/2" or 5/8" or -8, -10 AN - typically used for fuel, coolant and oil plumbing. 1/12 scale - 1/4" or...

Braided Line .060" Dia

This .060 diameter braided line scales to the equivalent 1:1 size of:1/25 scale - 1 1/4" or -20 AN - radiator lines, main fuel cell line or other large transfer lines.1/16 scale - 3/4" or -12 AN - typically used for coolant, large fuel delivery or...

Braided Line .080" Dia

This .080 diameter braided line equals the following 1:1 equivalent sizes at each scale:1/25 = 1 3/4" or -28 AN1/16 = 1" to 1 1/4" or -19, -20 AN1/12 = 3/4" or -12 AN1/8 = 1/2" or -8 ANTypical uses are radiator and coolant hoses, large...

Braided Line .018 Dia

This is the smallest braided line by Pro Tech.Depending on your scale, typical uses are brake lines, small fuel lines like Nitrous, oil lines, gauge and other control lines, etc.The scale size is determined by its outside diameter (OD) compared to real...

Distributor Kit 1/16

Resin distributor, shaft and boot material. The cap has 'starter' holes to drill out and insert the spark plug boot which is cut from the included material. Refer to the photo showing a completed distributor. Assembly and painting are not included...

Small Detailing Wire

Small gauge detailing wire for ignition items, lights, gauges and other smaller electrical loads. Available in Black, Blue and Yellow. One package contains 3' x .007" diameter wire. Specify color.

Roll Bar Padding 1/16

Rubber tubing for roll bars.Can also be used for other larger water/coolant hoses.At 1/16 scale, this would be equal to 1.5" ID and 3.5" OD.At 1/12 scale, this would be equal to 1.25". ID and 2.5" OD.Black.