Forward Frame Rail with Rack & Pinion 1/24-1/25

 Building your own chassis with a front strut suspension? This Forward Frame Rail will save you a ton of time.This is a one-piece, 3D-printed, front frame and doesn't need any assembly, plus it has a separate rack and pinion with boots. It...

Blower Manifold, 1/25

A resin blower manifold for a BBC or HEMI . One piece, resin, by VCG Resins, 1/25 scale.    

Fuel Cell, 15 Gal 1/25

A square fuel cell. Represents a 15-gal cell. For drag racing or street machines. Measurements: 5/8" x 1/2" x 3/8"    Contains 1 resin fuel cell, by VCG Resins, 1/25 scale.

Racing Fuel Cell Large, 1/25

A large sized flat fuel cell. Represents a 20-gal cell. This covers a large area but is fairly flat for its size. For drag racing or street machines. Measurements: 1-1/4" x 3/4" x 1/4"    Contains 1 resin fuel cell, by VCG Resins, 1/25...

Jaz Tall Fuel Cell, Upright 1/25

A 3-gallon JAZ fuel cell for Pro Mod or Pro Stock. Photo of real fuel cell.       Resin, by VCG Resins, 1/25 scale

Fuel Cell C 1/25

A square fuel cell. Represents a 15-gal cell. For drag racing or street machines. Measurements: 3/4" x 5/8" x 1/4"    Contains 1 resin fuel cell, by VCG Resins, 1/25 scale.

Switch Panel Assembly 1/16

A ready-to-install control switch panel assembly. Complete with toggle switches, LED's (non operative), cable and mounting hardware. Made of sytrene, brass and stainless steel. It's complete and ready to install.   Length of the cable is 4" and...

Holley Dominator Carb & PE Details, Pair 1/25

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage.  These carbs were drawn in CAD and capture as many features as possible of Holley's decades-famous Dominator race carb. The carb bodies are 3D-printed and are...

Dragster Wire Wheels with Light Shield 1/25

Real wire wheels with real spokes and one wheel has a 'light shield' on one side for newer dragsters. The light shield provides a larger area for the timing light to trigger at the end of the strip. Fully assembled and includes rubber O-Ring tires...

Dana - Rear End & Brake Kit, Stock Width 1/25

Here is a complete Dana standard width rear end with brakes. The rear end and axle tubes are molded in resin. Overall length between axle tube ends is 2.25" A 'bare' Dana rear without the brake kit is available here. The product photo shows a white...

Camaro '67 -'68 F/ C, P/M, P/S Body 1/25

Competition Resins calls this a funny car, but I think it works for pro mod and pro stock also.  I don't see anythig that would restrict it to just a F/C. Check out this Pro Stock decal sheet and this Nostalgia Funny Car sheet for decals that...

Race Car Instrument Panel & Gauge Cluster, Black 1/24-1/25

A set of 4 Instrument Clusters. These are not decals, but diecut cardstock. The actual cluster size is 7/8" long x 1/4" high. Each cluster contains six gagues (1 large and 5 smaller gauge faces), 2 indicator lights and 3 switchs/buttons. The gauge...

Race Car Instrument Gauge Panel Cluster, Gray 1/24-1/25

A set of 4 Instrument Clusters. These are not decals, but diecut cardstock. The actual cluster size is 7/8" long x 1/4" high. Each cluster contains six gagues (1 large and 5 smaller gauge faces), 2 indicator lights and 3 switchs/buttons. The gauge...

Halo Billet Steering Wheel 1/24-1/25

A custom billet steering wheel. Includes a horn button and other detailing items with instructions. The product photo above makes one ring look like rubber, but all are actually stainless steel.  This can be left as is or painted.  Makes one...

Micro Metal Foil Adhesive

Microscale's Micro-Adhesive is a Foil Adhesive and is a very easy and inexpensive way to apply aluminum foil or Bare-Metal Foil. The most common foil is ordinary household Aluminum foil, which most people have in their homes. This can be used for...

Front Engine Dragster Chassis, 1/24-1/25

A ready-made chassis for a front engine dragster. Includes: Frame rails Firewall Body panels Hood Instrument panel Instructions Wheelbase is about  3.5". All parts are molded in white.   One complete FED chassis, by Gofer Racing,...

Drag Racing Tire Decals #1, 1/25

Racing tire manufacturers, in yellow and white, are included in various sizes for each one. Includes (in yellow): Goodyear (three sizes) Eagle (two sizes) Includes (in white) M/T (three sizes) Goodyear (three sizes) Eagle (three...

Drag Racing Tire Decals #2, 1/25

Some the racing tire manufacturers are included in four sizes for each one. Includes (in white): Hoosier Firestone M&H Racemaster Drag 500 Shown in color for body decals: RaceMaster (two designs) Firestone (three designs) Hoosier (two...

Skulls, Skeletons, etc Decals, 1/25

An entire sheet of skulls and skeletons shown in various ways. Includes two of every design. Skulls with pistons, flames, checkered flags, dice and cards, snakes and even one that appears to be melting. Also includes various skeletons in different...

Soft Line - Hose .011", .29mm OD

This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .008" or .20mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 9/32"1/16 scale = 1/12 scale =1/8...

Soft Line - Hose .005", .12mm OD

This is the smallest black soft line I have. This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .0047" or .14mm.  Typical uses are small oil lines, vacuum and fuel lines, especially fuel...

'68 Dana Camaro Hood 1/25

A split double intake hood to replicate the 1968 Dana Camaro. Here's an example of the hood on a Dana Camaro.           Contains 1 resin hood, 1/25 scale

M/T Treaded Pro Street/Sportsman Rear Tires, Pair 1/25

This treaded M/T Pro Street/Sportsman tire set is based on a 29 x 12.5-15 tire, They'll also look great on a street rod, rat rod or a mean street machine. They are designed to fit 1/25th scale wheels.  Tire width is ~.400" Rear tire is...

Front Engine Fiat Dragster Body 1/25

A front engine Fiat drag racing body from the early '60's to today. Features: One-piece body Use AMT Front Engine Dragster kit for Chassis Body Color - White   One resin body with included items as outlined, 1/25 scale, by Competition...

Aluminum Distributor Body 1/25

This is the same Pro Tech distributor body used in their pre-wired distributors. This is the body without the spark plug wires.  You may have your own wires you want to use. A hole is provided in the top.   Contains 1 machined aluminum...

Black & White Checkerboard Squares, Decal, 1/25

An entire sheet of black & white squares. Use them on your firewall or maybe a diorama floor. There are 8 squares per linear inch and 64 squares per square inch.   Measures 7" x 4.75" One decal sheet, by Gofer Racing, 1/25 scale.

Headlight, Spot Light, Speaker Rectangular Screens 1/24-1/25

Photo etched set of rectangular screens with square holes to protect exterior items from being damaged. They can be cut to size to make your own gas/brake pedals or maybe a rat rod air vent. Can also be used for speaker grilles. The set contains 4...

Gasser & New Graphics Decal Sheet #2, 1/25

1/25 scale mini decal sheet with Gasser graphics plus a few sponsors for newer cars or rat rods. Includes (2 of each)  M&H Racemaster "Gas Chamber" "The STRIP Teaser" Moon Eyes New York National Speedway logo "Rapid Ronnie" A/Gas,...

American Trak Star Rear Wheels, 1/25

American Racing TrakStar Rear Wheels in 1/25 scale   Brand new and I only have a limited quantity to start with. These American Racing rear wheels match the Trak Star front wheels. Here's a  photo of the real wheel with a beadlock ring...

A Little Bit of Everything Graphics Decals, 1/25

Good for gassers, rat rods and junkers. Take a look at the photo to see the variety of decals included.  I don't know how to describe some of them.   Measures 7" x 4.75" One decal sheet, by Gofer Racing, 1/25 scale.

Modern Police Graphics Decals, 1/25

Everything you need for a generic police car. Includes 'POLICE' in many different colors and sizes. You'll have to look at the photo to see all that's included.   Measures 7" x 4.75" One decal sheet, by Gofer Racing, 1/25 scale.

Gasser Graphics Decals, 1/25

Lots of Gasser and Rat Rod related graphics. Includes: American flags Cross Bones flags Hooker Headers Letters to make A/G, B/G, etc for gasser classes and more   Measures 7" x 4.75" One decal sheet, by Gofer Racing, 1/25 scale.

Service Truck, Gas Station Decal Sheet, 1/25

This is just what you need to detail that service truck, tow truck or diorama gas station. These decals look good on the sides of your truck or on signs for your diorama. All of the decals relate to auto repair, associated trucks and service vehicles...

10 Hole Wheel Center with Billet Center Caps 1/24-1/25

Turn your old wheel into a 10-Hole wheel. Includes: Center 10-hole discHubs (fit 1/16" axle)Knock- off spinnersHex nuts   By Detail Master, 1/24-1/25 scales.

Flames & Pinstripping Decals, 1/25

Flames, flames and more flames plus small pinstripping designs Flames and pinstriping in many different shapes and colors.   Measures 7" x 4.75" One decal sheet, by Gofer Racing, 1/25 scale.

Rat Rod & Custom Pinstriping Decals, 1/25

Lots of pinstriping for your hood, trunk lid, body sides, dashboard and many more locations. Includes various designs in different sizes and colors. Also includes straight lines inyellow, white, red, blue and black.   Measures 7" x 4.75" One...