A complete one-piece 3D-resin-printed chassis with FREE DOMESTIC SHIPPING
This is similar to the Mustang Chassis #1 with a shorter overall length, lower height and no driver's cage (see dimensions below).
Made of resin so easy modifications can be made by cutting, sanding and use of CA glue
I designed it to utilize many of Futurattraction's suspension and other items (see list of links below). It will save you a ton of time without having to scratch build your own means of mounting the front/rear suspension and more.
Main structural members are .090" diameter and other members are .080" diameter.
Front strut upper and lower mounting eyelets, for the strut/coil over spindle and lower A-arms.
A small machined aluminum bolt/nut set will be available for this (as seen in the photos)**
Rear 4-link brackets are molded to the chassis
A small machined aluminum bolt/nut set will be available for this and includes bolts for the rear shocks (as seen in the photos)**
Rear upper coil-over shock supports
A small machined aluminum bolt/nut set will be available for this and includes bolts for the rear shocks and 4-links (as seen in the photos)**
Rear engine/transmission plate is molded in
Wheelbase: 4.50" - 4.82"
Width at bottom rails: 2.30"
Overall length: 7.25"
Overall height: 1.57"
Width at rooftop: 1.12"
Length at rooftop 1.51"
FUTURATTRACTION PRODUCTS THAT WILL FIT:
Front Strut Kit for 5-Bolt Wheels with TBM Rotors, or with Drilled Rotors
Front Strut Kit for Spindle Wheels
Coil-Over Shock Kit (rear)
16x33" Drag Slicks (largest that fits) or 14x32" Drag Slicks, if you want more room.
Chassis is complete and in one-piece, but addition and assembly of suspension, engine, wheels and body are required and not included.
3D-printed resin chassis by Ted's Modeling, 1/25 scale
** Aluminum bolt sets are by RB Motion