1/25 - 1/24 Scale

Clutch Can HEMI 1/25

 Here is an item every race car needs and is required in almost all NHRA classes. This clutch will contain a clutch/flywheel explosion. This is a replica of a real world Trick Titanium clutch can and matches the bellhousing pattern on HEMI blocks...

Front Strut Kit for Aluminum Wheels, TBM Rotors 1/25

This is a complete 28 piece strut front end kit for 5-bolt wheels (a strut set for spindle wheels is found here. The nose of the 3D spindle is designed to center in Futurattraction's 5-bolt wheels and includes 3D-printed hubs to fit to the back...

Dana - Rear End & Brake Kit, Stock Width 1/25

Here is a complete Dana standard width rear end with brakes. The rear end and axle tubes are molded in resin. Overall length between axle tube ends is 2.25" A 'bare' Dana rear without the brake kit is available here. The product photo shows a white...

Pro Mod / Funny Car / Pro Stock Rear Wing 1/25

Includes main horizontal wing, sides and support rods. This wing can be made to fit many different race classes.   Here are some examples of what can be done.     Resin, 1/25 scale

70's Pro Stock Front Tires - Firestone Drag 500 / Goodyear, 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer.   Has Firestone Drag 500 & Goodyear MarkingsCast from Medium Soft Rubber These are semi hard tires but still flexible. Measurements:Outside Diameter = .1...

Fenton/Anson Front Wheels 1/25

A pair of 5-slot Fenton (or Anson) front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Gasser Front Wheels, but these have larger slots  OD = .67", 17mm Overall Width = .19", 5mm   The wheels that will...

Pro Mod / Pro Stock Rear Wing 1/25

A one piece wing with an arch shape and small side spoilers. This is a typical wing for the Stratus body, but it can be made to fit many different cars and race classes. Dimensions: Width 2.5" Depth .625"   Resin, 1/25 scale

Cragar 15" SuperTrick Wheels 4-Set, Hub 1/24

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1970s-80s era drag cars.  Crowned centers are present on both front and rear wheels, with double-drilled pattern on rear wheels. Inner and...

Round 4" Aluminum (Nostalgia Style) Air Cleaner 1/25

This machined aluminum air cleaner measures 4"w x 2"h. It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. The photo shows a 14" air cleaner with an added fine mesh screen...

Hubcaps - 'Dog Dish' - Generic 1/25

A set of four polished aluminum hubcaps named after what they look like - dog dish. Real aluminum hubcaps to set off your model whether it's a period correct '50's - '60's, rat rod, custom or stock.   Measures 5/8" diameter. Four aluminum pieces...

Rear Tube Frame/Clip .700" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed in FUD material (see below). Dimensions are:Frame width = .700" (about 45/64", 17.8mm)Frame tube diameter = .080"Cross member diameter = .063"Overall length = 2.55" Two...

Small Multi-Use Springs, Throttle/Hood/Brake (pair)

Two small springs for throttle linkage or to hold those semi tractor air hoses.Depending on your scale, these could be used for brake pad springs or hood-hinge springs.Spring length is .25"Contains two (2) steel springs, compression type, by Model Car...