Created with Sketch. Created with Sketch.

Shop by Category

1/16 Scale

  • Front End Mounting Brackets 1/16

    These brackets are intended to simulate the mounting brackets used to locate removable front ends from drag or other styles of cars.   Photo etched, 1/16 scale, by Futurattraction.   Photo Etched, (2 pr) 

    $1.25
    Add to Cart
  • Soft Line - Hose .006", .15mm OD

    This is the smallest black soft line I have. This is a black smooth fabric material and cuts easily with an x-acto knife or really sharp scissors. It can be bent at sharp angles without kinking. The OD dimension is .006" or .15mm.  This soft...

    $2.00
    Add to Cart
  • Grille or Mesh Decal #2, All Scales

    This simulated grille also looks like a mesh and it is a decal which requires a solid backing. This is the same pattern as Grille Decal #1, except the pattern is about half the size. Up close, the pattern resembles a chain link fence. This is a...

    $6.95
    Add to Cart
  • Grille or Mesh Decal #1, All Scales

    This simulated grille also looks like a mesh and it is a decal which requires a solid backing. Up close, the pattern resembles a chain link fence. This has a larger pattern then the similar Grille Decal #2. This is a waterslide decal and not a 3D...

    $6.95
    Add to Cart
  • Confederate Flag Set, All Scales

    Confederate Flag Set in five different sizes. This isn't a decal. The flags have adhesive backing. Apply to aluminum foil to make realistic flag Sizes are all square shaped: .62" (16 mm) .47" (12 mm) .35" (9 mm) .15" (4 mm) .12" (3...

    $11.95
    Add to Cart
  • Cross Bones & Skull Flag Set, All Scales

    Skull and Cross Bone flags and symbols in several different sizes. This isn't a decal. The flags have adhesive backing.. Apply to aluminum foil and wrinkle for a realistic flag. Contains: One 1.8" x 1" (45 x 25 mm) two sides flag Two .7"...

    $11.95
    Add to Cart
  • US Flag Set, All Scales

    US Flag Set, 50-Stars, in four different sizes. This isn't a decal. The flags have adhesive backing.. Contains: One 1.5" x .75"  (40 x 20 mm) two sides flag One  .6 x .3" (16 x 8 mm) two-sides flag Three .6 x .3" (16 x 8 mm)...

    $11.95
    Add to Cart
  • Chevy Bel Air Convertible 1/16

    Chevy Bel Air Convertible 1/16

    Brand new 1/16 scale AMT. 1955 Chevy Bel-Air Convertible Brand new in sealed box Features: 2 in 1 kit - Stock or Custom SBC Engine       Turbocharger       4-bbl Carb       Finned Valve Covers  ...

    $35.00
    Add to Cart
  • Soft Line - Hose or Cable .031", .8mm OD Dia.

    This is a soft line that is easily configured to the space you have. It's able to bend at a sharp angle without kinking. At 1/25 scale, use for heater hose, air conditioning hose and more.Makes perfect spark plug cable at 1/12 scale (see also soft line ...

    $2.25
    Add to Cart
  • Soft Clear Line Hose .032", .8mm

    This is a soft clear tubing that is easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing.   For fittings, see Hex Fittings or Size I Ferrules sized at .080 for this clear line. This soft line...

    $1.50
    Add to Cart
  • '55 Chevy Nomad Wagon, 1/16 scale

    '55 Chevy Nomad Wagon, 1/16 scale

    A big '55 Chevy Nomad Wagon in 1/16 scale.  Product Features Highly detailed plastic pieces molded in white, chrome and clear. SBC Engine with a 4bbl carb and turbo charger. Opening doors and hood. Vinyl ignition wiring and water hose...

    $35.00
    Add to Cart
  • Black Velvet-Stik Flocked Paper

    This is a really fine textured flock on an adhesive backed paper. Makes excellent floor mats, carpet, trunk lining and other areas that are fairly flat. Perfect for retro-rods, custom, hot rods and rat rods. Available in black.   Ken's Kustom...

    $2.99
    Add to Cart
  • Micro Sol, Setting Solution

    Microscale's Micro-Sol is a decal "setting" solution for the most difficult irregular surfaces to be found on models. It allows the decal to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion...

    $4.00
    Add to Cart
  • Micro Set, Setting Solution

    Microscale's Micro-Set is a decal "setting" solution that softens decals and improves adhesion plus lets the decal conform to the model's surface. To apply Micro Set: Use a soft flat artist's brush and apply Micro Set where you are going to apply the...

    $4.00
    Add to Cart
  • Soft Line - Hose .010", .25mm OD

    This is a black nylon-coated stainless steel multi-strand wire. It is slightly springy and can be bent at sharp anglesThe OD dimension is .010" or .25mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/4"1/16...

    $2.00
    Add to Cart
  • Soft Line - Hose .015", .38mm OD

    This is a black nylon-coated stainless steel multi-strand wire. It is slightly springy and can be bent at sharp anglesThe OD dimension is .015" or .38mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 3/8"1/16...

    $2.00
    Add to Cart
  • Dragster Wire Wheels 1/16

    Finally, a wire wheel with real spokes that looks realistic. Fully assembled and includes rubber O-Ring tires. Featuring small hubs and thin-walled rims for a proportional appearance.   The hub utilizes 3/32" aluminum tubing that will fit the...

    $35.00
    Add to Cart
  • This is Bright Red as an example of packaging

    Fuzzi Fur, Super Fine Flock, all scales

    A really fine 'fur' flocking for carpets, floor mats, upholstery, etc. Use a diluted white glue (Elmer's), spray adhesive or wet paint, thinly spread over the surface and sprinkle the fur over the area. Can be packed down for a flatter look or left as...

    $2.50
    Choose Options
  • Soft Clear Line - Hose .059, 1.5mm OD Dia.

    This a soft clear line is easily configured to the space you have. It's able to bend at a sharp angle without kinking.See Hex Fittings or Size H Ferrules for this clear line.This line line equals the following equivalent 1:1 size at each scale.1/25 scale...

    $1.25
    Add to Cart
  • Soft Clear Line Hose .078, 2mm OD .039, 1mm ID

    This a soft clear tubing (frosted, not see-through) that is easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing.   This is hollow and the open ends make it easy to attach to objects with a placement...

    $1.50
    Add to Cart
  • Clear Soft Line - Hose .030", .75 mm OD Dia.

    This is a soft clear line that is easily configured to the space you have. It's able to bend at a sharp angle without kinking.See .030" Hex Fittings or Size B Ferrules for this clear line.This soft line equals the following equivalent 1:1 size at each...

    $1.00
    Add to Cart
  • SALE

    Decal Magic, Setting Solution

    Brand new from Scale Motorsport.   A recent Model Cars magazine review stated "The old 'standard' decal setting solutions were designed when decals were made with different inks and they were made to 'melt' the decals.  Decal Magic is made...

    MSRP: $5.50
    Was: $5.50
    Now: $4.75
    Add to Cart
  • Soft Tubing- Hose .105", 2.7mm OD

    This a soft, hollow rubber line that is easily configured to the space you have. Dimensions: .105" OD .059" ID 12" Length This soft line equals the following equivalent 1:1 sizes:1/25 scale = 2-5/8"1/16 scale = 1-5/8"1/12 scale = 1-1/4"1/8 scale...

    $1.75
    Add to Cart
  • Gray Cable - Hose .019, .5mm OD

    This looks like a stainless steel line, but it's a small gauge stainless steel wire wrapped in a gray nylon jacket.  his is ideal for a throttle or parachute release cable where a steel cable is housed in a jacket. The wire core is springy and...

    $2.25
    Add to Cart
  • Gray Cable .010", .25mm Dia

    This looks like a stainless steel line, but it's a small gauge stainless steel wire wrapped in a gray nylon jacket. This is ideal for a throttle or parachute release cable where a steel cable is housed in a jacket. The wire core is springy and doesn't...

    $2.25
    Add to Cart
  • Steering Wheel 1/16

    Sport Steering Wheel kit. The wheel grip is mastered in 3D and will be sold as either 3D-printed or resin, depending on availability. Three-spoke wheel center is photo etched and replicates Grant Performance #673. The wheel is .82" (13/16") OD. Photo...

    $6.00
    Add to Cart
  • Holley Dominator & PE Details, Pair 1/16

    Holley Dominator & PE Details, Pair 1/16

    Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage Contains 2 carbs and PE details.   Photo shows completed carb and is for illustration only. Assembly required. Resin and photo etched parts by Futurattraction, 1/16 scale

    $20.00
    Add to Cart