Switch Panel Assembly 1/16

A ready-to-install control switch panel assembly. Complete with toggle switches, LED's (non operative), cable and mounting hardware. Made of sytrene, brass and stainless steel. It's complete and ready to install.   Length of the cable is 4" and...

Micro Metal Foil Adhesive

Microscale's Micro-Adhesive is a Foil Adhesive and is a very easy and inexpensive way to apply aluminum foil or Bare-Metal Foil. This can be used for parts also. It will not craze clear plastic or tend to warp thin plastic parts like other cements...

Front Engine Dragster Chassis, 1/24-1/25

A ready-made chassis for a front engine dragster. Includes: Frame rails Firewall Body panels Hood Instrument panel Instructions Wheelbase is about  3.5". All parts are molded in white.   One complete FED chassis, by Gofer Racing,...

Headlight, Spot Light Rectangular Screens 1/24-1/25

Photo etched set of rectangular screens with square holes to protect exterior items from being damaged. Great to protect headlights or large spot lights and can be cut to size to make your own gas/brake pedals or maybe a rat rod air vent. The set...

Carbon Kevlar Decal Black on Amber1/25

This carbon fiber weave is black with an amber weave. It's used on parts for weight reduction while maintaining strength. Apply these decals over your components and instantly you have created the appearance of a truly woven fabric surface. Uses...

Pro Mod Rectangle Rear Wing, 1/25

A one piece tapered wing for Pro Mod or other builds. Wing has Tapered Side Spill Plates on Bottom Width 2.350 Height .620 Length .780 This is a typical wing for Pro Mod, but it can be made to fit many different cars and race classes. Resin,...

Bed Liner, Floor Covering & Mats, Truck Step Material

This 'non-skid' black rubber-like material is excellent for: Pickup truck bed liner Truck steps Car and truck rubber foor covering (where you don't want carpet) Any non-skid application It has a rough, bumpy texture and molded in black. Dimensions: ...

Wheelie Bar Single X Frame, 1/25

Lower Wheelie Bar Frame - Single X Design.  Building wheelie bars in 1/25th scale is challenging.  It can be difficult to get longitudinal tubing members parallel to each other and mirror each other, while also being cleanly and solidly...

Mooneyes Car Club Plaque Set 1/25

A set of four different styles of Mooneyes Car Plaques. Three are the size and shape of license plates and would look great on the front of cars that only have a rear state license plate. Can be installed in the exterior or interior or both...

Carbon Fiber Black on Bronze Decal Sheet 1/25

This carbon fiber weave has bronze threads running through. It's used on parts for weight reduction while maintaining strength. Apply these decals over your components and instantly you have created the appearance of a truly woven fabric surface. Uses...

Windshield Wipers - Solid Blade 1/24-1/25

These wipers are common as billet aluminum straight arm and blade on street rods. The set contains a pair each of 4 different length arms and matching blades.   One photo etched sheet by Detail Master, 1/24-1/25 scales.

Under the Hood Decal Sheet 1, 1/25

Here are a few general decals for your engine bay. (the actual decals are sharper than the photo above) Includes warning, general information, inspection and specification decals.   See the photo above for what is included.   One decal...

Engine and Under-Hood Decal Sheet 1, 1/25

A combination of manufacturers and inspection/warning decals. Includes two each of each size for a total of 20 decals. See the photo above for what is included.   One decal sheet, 20 separate pieces, by VCG Resins, 1/24-1/25 scale.  

Wheelie Bar Double X Frame, 1/25

Lower Wheelie Bar Frame  Modern Style - Double X Design.  Building wheelie bars in 1/25th scale is challenging.  It can be difficult to get longitudinal tubing members parallel to each other and mirror each other, while also being cleanly...

Honeycomb Grille Pattern 1/24-1/25

This is a plate consisting of small holes in a honeycomb pattern. This is a tighter pattern than Detail Master's Rectangular Grille material. It is typically used for a grille, in the place of the kit piece. You can see through it to view your radiator,...

Headlight Visor Set, 1/25

A Visor Set to cover the top of the headlight (like a shade) or it can cover the top half of the headlight (as in the '50's) Contains three different sizes and a few different patterns.   One photo etched sheets, by Highlight Model Studio, 1/25...

Custom Billet Wings - Evolution GT 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Evolution GT' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports Instructions The included instructions show the same wing drawing for 3 different wings in this...

Confederate Flag Set, All Scales

Confederate Flag Set in five different sizes. This isn't a decal. The flags have adhesive backing. Apply to aluminum foil to make realistic flag Sizes are all square shaped: .62" (16 mm) .47" (12 mm) .35" (9 mm) .15" (4 mm) .12" (3 mm) One sheet...

US Flag Set, All Scales

US Flag Set, 50-Stars, in four different sizes. This isn't a decal. The flags have adhesive backing.. Contains: One 1.5" x .75"  (40 x 20 mm) two sides flag One  .6 x .3" (16 x 8 mm) two-sides flag Three .6 x .3" (16 x 8 mm) flag Three ...

Air Foil Wing / Spoiler, 1/25

A set of 4 wings to be used as a rear spoiler or air deflector at the front of the car or roof or ???   Dimensions of each wing is 1-1/4" x 3/8" No supporting hardware is included. The photo looks black but the wings are a shiny metal. Made of .015"...

Bumper Brackets 1/25

A set of two different style brackets to hold up that bumper or other item. Straight brackets with holes. Dropped style bracket. Photos courtesy of Highlight Model Studio Facebook page. Assembly is required.   Photo etched sheet, by...

Chevy 1966 Pickup Detail Kit 1/25

A detail set for Revell's 1966 Chevy Pickup Truck.  Includes: Cab trim pieces behind the door C10 logo Steering wheel horn ring Rear tail lights Keys     Here's a kit that you may like.   Photo etched sheet, by Highlight Model...

Windshield Wipers, 4 Pairs 1/25

This windshield wiper set is typical for cars from the '40's to today. The older cars have them exposed and left as stainless steel, while the newer cars have the wiper blades hidden below the hood and are normally black. Includes 4 sets of blades with...

Large Tool Box, 1/25

A large tool box to hold the small tool box by Highlight Model Studio.  As is, it has a stainless steel or shiny aluminum appearance. Actually can be made to open or build it in an open or closed position. Has a diamond pattern for the top and...

Tool Set, 1/25

This photo etched sheet contains detailed tools you need for a fantastic show display (with the trunk open) or a diorama. Contains: 14 - Open-end wrenches, various sizes 1   - Open-end wrench carrier 1   - Hacksaw 1 ...

Rectangle Grille Pattern 1/24-1/25

This is a plate consisting of a rectangular pattern. It is typically used for a grille, in the place of the kit piece. You can see through it to view your radiator, so make sure it looks realistic with this radiator face detail. It's large enough for...

Wheelie Bar Assembly - Single Wheel 1/24

Here is a realistic looking, ready-to-install, single wheelie bar assembly. Made of aluminum and stainless steel and features Futurattraction's wheelie bar bracket and RB Motion rod ends, bolts, washers and nuts. Includes additional rod ends and bolts...

Chain Link License Plate Frames 1/25

A set of 8 license plate frames with chain links surrounding the plate area. In the center of the license plate area are 3 keys.  They're really small and easy to lose. Enough for at several cars. Photo etched in nickel silver.   By Model Car...

Custom Billet Wings - 'Valdez GT', 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Valdez GT' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions The included instructions show the same wing drawing for 3 different wings in this...

Custom Billet Wings - Slick Shooter, 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Slick Shooter' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions The included instructions show the same wing drawing for 3 different wings in...

Custom Billet Wings - Wingbat GT, 1/25

Part of the Model Car Garage 'Tuner Series' is this set of 'Wingbat GT' wings. A photo etched plate consisting of: 2 horizontal wings 2 wing ends Supports. Instructions Length of both wings is 2-1/8" Support height is .45" The instructions state that...

Street Rod Headlights, Polished 1/25

A pair of polished aluminum headlights with a cone shape. Includes: Aluminum headlight bodies, polished Plastic lenses Aluminum disc to mount behind the lenses. The bodies have a hole in the bottom for mounting  Measurements: OD: 19/64" Depth:...

Large Tapered Pro Stock Wing 1/25

This wing is fairly large and is straighter along the rear edge than along the front edge. End plates are tapered toward the rear and extend down from the top edge. Measurements: Overall length: 2.15" (at the widest, front, edge) Width at end plates:...

Pro Stock/Pro Mod Wing 1/25

This wing has a small arch as viewed from the toop. Has teardrop end plates. Measurements: Overall length: 2.15" Width at end plates: .52" Contains 1 resin piece, 1/25 scale

Altered or Small Wing 1/25

A small wing for any use, but a fuel altered is an example. Has teardrop end plates. Measurements: Length: 1" Width: .62" Contains 1 resin piece, 1/25 scale

Desktop Computer 1/25

A scale desktop computer and large screen monitor. Includes printed keyboard and screen to be cut and applied.   Four resin pieces and printed material, 1/25 scale, by VCG Resins