Fuel Management

Soft Line - Hose .005", .12mm OD

This is the smallest black soft line I have. This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .0047" or .14mm.  Typical uses are small oil lines, vacuum and fuel lines, especially fuel...

Soft Clear Line - Hose .005", .13mm OD

This is my smallest clear line.  You can barely see it, but if you need a really small clear line, this is it.This could be used for a 1/25 radiator overflow tube, small carburetor fuel lines, or other clear line needed.  This soft line is easy...

7-1/2" Diameter Dual Air Cleaners, 1/24-1/25

A pair of small air cleaners that will fit a 4bbl carb. At 1/24 scale they equal 7.5" diameter At 1/25 scale they equal 7.8" diameter. It consists of a semi-coned aluminum top and flat aluminum bottom, with screen material in between. Here is an...

8" Diameter Dual Air Cleaners, 1/25

A pair of small air cleaners that will fit a 4bbl carb. It consists of an aluminum top and bottom with screen material.  The top is peaked in the center   Two complete air cleaners, by Detail Master, 1/25 scale.  

Injector Velocity Stacks 1/25

Shiny aluminum injector stacks (tubes) for that early style Hilborn injected engine. Dimensions:Length: .62", (5/8")Diameter - OD (tube): .125", (1/6") These stacks are hollowed and flared at the top and solid at the bottom They can also be used as...

Weber Small Velocity Stacks 1/24-1/25

This will add that special detail to your Weber induction system or you may find other uses for them. They are hand turned, solid, billet aluminum stacks and there are no seams. They can be used on a standard kit engine.  The bottom diameter is ...

Soft Line - Red .016", .4mm OD

This is a small, soft, solid, semi-shiny line.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 3/8"1/16 scale = 1/4"1/12...

Soft Black Line - Hose .016", .4mm OD

This is a small, soft, solid, semi-shiny line. Can be used for real life 9mm spark plug wires. They would drape like the real thing. It's the perfect size for those small injector lines to the manifold and injector hat. It can bend at a sharp angle...

Soft Clear Line - Hose .008", .2mm OD

This is really small, soft, solid, clear line . You can barely see it, but if you need a really small clear line, this is it.This could be used for a 1/25 radiator overflow tube, small carburetor fuel lines, or other clear line needed.  This soft...

Soft Clear Line - Hose .012", .3mm OD

This is a pretty small soft, solid, clear line . It's the perfect thing for those small fuel lines at the engine.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following...

Blower Scoop Hardware Set 1/24-1/25

Everything you need to detail that blower and injection hat. Includes: Blower and hat hold-down platesSpark plug wire loomsAssorted bracketsLinkage fittingsIntake butterfliesBlower belt safety guardand moreStainless Steel and shiny right out of the...

LS, BBC EFI Ram IntakeManifold, 1/25

A 3D-printed EFI manifold for a BBC or HEMI engine. This is one of my latest designs which I'm also making in a CNC machined aluminum version. With low restrictive rounded runners for maximum horsepower as well as improved low end torque for great...