Lines and Fittings (all scales)

Hex Braided Line Fittings .025

These hex fittings are compatible with the .025 diameter Braided Line and .020 aluminum hard line.   Make your own AN fittings using Pro Tech's aluminum Hex Fittings. For a realistic anodized appearance on these aluminum fitting, use...

Braided Line .080" Dia

This .080 diameter braided line equals the following 1:1 equivalent sizes at each scale:1/25 = 1 3/4" or -28 AN1/16 = 1" to 1 1/4" or -19, -20 AN1/12 = 3/4" or -12 AN1/8 = 1/2" or -8 ANTypical uses are radiator and coolant hoses, large...

Braided Line .045" Dia

This .045 diameter braided line equals a 1:1 size of:1/25 scale - 1" or -16 AN used for larger fuel or oil lines, larger water transfer lines1/16 scale - 1/2" or 5/8" or -8, -10 AN - typically used for fuel, coolant and oil plumbing. 1/12 scale - 1/4" or...

Braided Line .035 Dia

This .035 diameter braided line equals a scale equivalent 1:1 size of:1/25 scale - 3/4" or -12 AN larger fuel or oil lines.1/16 scale - 3/8" or -6 AN - typically used for smaller fuel or oil plumbing. 1/12 scale - 1/4" or -4 AN...

Braided Line .025 Dia

Depending on your scale, typical uses are fuel, nitrous, oil lines, small heater and coolant hoses and other small transfer lines.The scale size is determined by its outside diameter (OD) compared to real world braided line since an inside diameter isn't...

Braided Line .018 Dia

This is the smallest braided line by Pro Tech.Depending on your scale, typical uses are brake lines, small fuel lines like Nitrous, oil lines, gauge and other control lines, etc.The scale size is determined by its outside diameter (OD) compared to real...

Blown Engine Fuel Plumbing Schematics

NEW AND UPDATED All the information you need to plumb the fuel lines on an early or modern blown engine. A few lines can be changed to represent older blown engines.Covers all the fuel lines from the fuel cell to the injectors, listed in 4 different...

Ferrule Fittings for Braided, Soft, Hard LInes -Brass

Perfect for simulating crimp-type end-of-line fittings on Blower injector lines, Injector Hat injector lines or carb fittings. Can also be used as carburetor 'boosters'.  The photo above shows injector lines using Size A ferrules and .020"...

Soft Line - Hose .020", .5mm OD

This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/2"1/16 scale = 1/4" or 5/16"1/12 scale =1/4"1/8 scale  = 1/8"Typical uses are small oil, vacuum and fuel lines, especially fuel & nitrous delivery at the the...

Hex Braided Line Fittings .080

These hex fittings are compatible with the .080 diameter Braided Line and .078 aluminum hard line.   Make your own AN fittings using Pro Tech's aluminum Hex Fittings.For a realistic anodized appearance on these aluminum fitting, use Duplicolor...

Hex Braided Line Fittings .035

These hex fittings are compatible with the .035 diameter Braided Line and our .034 and .031 aluminum 'hard' lines found in 'Hard & Soft Lines'.   Make your own AN fittings using Pro Tech's aluminum Hex Fittings. For a realistic anodized...

Soft Red Line - Hose .039, 1mm OD

This is a soft, stretchable red line that bends easily and smoothly.  It's able to bend at a sharp angle without kinking. It is bright red and made of Polyester.See .040" Hex Fittings or Size C (or Size D for more space) Ferrules for hose ends.This...