1/16 Scale

Ignition or General Wire, White .0194"

This white wire can be used for many heavier electrical loads. Scale Motorsport's wire is not as stiff as most other electrical wires. It is .0194" diameter which is equal in real life to just under 1/2" or 12mm at 1/25 scale. At 1/16 scale, this wire...

Pin Flow Applicator for Liquid The Glue

For a precise, small application using a needle-tip for no glue runs. I've tried needle-type glue applicators in the past and the problem was that the CA glue would clog before I applied it. Now here is an applicator that works with liquid glue made for...

Aluminum Hard Line .118", 3mm OD

This is a solid aluminum line that can be configured to the space you have. It's able to bend at a sharp angle without kinking. This is a large diameter line and although it's pliable, it requires a tool or object to bend it around if you want sharp...

RBS Square 4-Hole Hat with Butterflys, 1/16

This is a CAD designed replica of an RBS Square 4-Hole Injector Hat, in 1/16 scale. The intake openings are hollowed out. Small holes across the front openings are provided for a rod to connect the butterflys to your throttle linkage and barrel valve...

General Wiring .019” Gray

This is longer than most brands at 48”. It’s multi-scale, because it represents a different size, for each scale. At 1/24-1/25 scale, it could be a larger wire like big spark plug wires, battery cables and more. At 1/16 scale it would be a...

Weld Magnum Aluminum Rear Wheels 1/16

A detailed pair of Weld Magnum aluminum rear wheels In 1/16 scale. These match Futurattraction's Magnum front wheels.  These replicate Weld's 16" x 16" wheels. Three different inserts stack to create a 3-dimentional look. The beadlock rings...

Weld Magnum Front Wheels, 1/16

A pair of  Weld's Magnum 15" x 3.5" spindle-mounted front wheel. Includes three .20" thick 6061-T1 aluminum center inserts that stack for a 3-dimentional look. The outer-most insert is slightly smaller to represent the 'stepped' look. Also...

HEMI or BBC Oil Pan 1/16

Mark Johnson is a master at designing, and resin casting 1/16 scale parts. This oil pan is an example. I test fitted this pan on a Comp Resins Hemi and a BBC engine. The detailing is excellent.   One oil pan, by Mark Johnson, 1/16 scale.