1/16 Scale

4-Link Suspension Bracket Kit 1/16

This 4-link bracket set includes eight brackets, enough to build one car.  They are patterned after a popular 1:1 bracket.  The hole diameters in the housing brackets are .188", so they can be drilled out to the diameter of your axle housing...

Slotted Rotor 4-Piece Set 1/16

Slotted, 4-rotor set - front and rear. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale.   Photo of a real slotted rotor with dual calipers. For a set of drilled rotors check here, or for drilled...

Drilled Rotor 4-Piece Set 1/16

Drilled, 4-rotor set. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale. For rear rotors only, click here.   Four pieces, photo etched .015" nickel-silver plate, 1/16 scale.

Drilled Rotor Pair, Large/Rear 1/16

Drilled, large 2-rotor set - These represent a scale diameter of 11.75" @ 1/16 scale. These would be used as rear rotors.  For a set of front and rear rotors, click here.   One pair, photo etched .015" nickel-silver plate, 1/16 scale.

Injector Butterfly Set for Competition Resins Injector Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resin's '70's Ribbed injector hat.  They measure .215" diameter and may fit your...

Dragster or Fuel Altered Front Tires 1/16

Skinny front tires for wire or spoked wheels, as found on dragsters and altered. Measurements: 1" OD 0.7" ID These tires fit the Comp Resins 12-spoke wheels found here. Contains 1 pair rubber-like tires.

Cragar Super Trick 8-hole Rear Wheels 1/16

Cragar Super Trick, 8-hole rear drag racing wheels. Fits Revell tires...

Door Lever Set - Doorslammer or Street Machine 1/16

Door car levers to detail that race car or street machine interior.  These levers can be used in any type of build. They can be used for interior or exterior handles as well as parachute or other release leavers. Photo etched .010...

Injector Butterfly Set for Competition Resins Shotgun Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins 2-Hole Shotgun injector hat (part #148).  Click here to see the 1/16 injector hat...

Injector Butterfly Set for Competition Resins Enderle Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins Enderle injector hat (part #035).  Click here to see the 1/16 injector hat...

Dragster Accelerator Pedal Set 1/16

These dragster pedals replicate modern tubular constructed accelerator pedals. They incorporate a safety return loop on both the top and side. Choose whichever one you wish and remove the other. Photo etched, 1/16 scale.

Pedal Set for FC, PM or Door Slammer 1/16

You need a set of these pedels to complete that racing interior and sdd realism and detail to your build.   Contains one each: Accelerator pedal Brake pedal Clutch pedal Pedal foot pads Make sure you click on the photo, to enlarge...

Lenco Shifter Lever Set 1/16

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers and will work with any Lenco transmission.  See Futurattraction's Lenco here. Make sure you click on the...

Hand Brake Levers for for PM or TF 1/16

A set of Hand Brake Levers for your Dragster or Funny Car.  Adds realism and detail to your build. Contains two brake levers with additional hand grips. Place a small piece of styrene between the lever grip and added grip for thickness. Photo...

Small Block Engine Crank Trigger 1/16

Here is a Crank Trigger kit, for a small block engine and especially for the small block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a...

Big Block Engine Crank Trigger 1/16

Here is a Crank Trigger kit, for the a block engine and especially for the big block Chevy. Includes crank trigger wheel, sensor mount and adjustable sensor mounting bracket. A crank triggered ignition system can make more horsepower than a distributor...

Oval Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. These are oval, but round bezels are also available for a straight exhaust exit. Photo Etched,...

Round Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. The inside diameter is .25". These are round, but oval bezels are also available for an angled...

Round Window Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the window bezels used on modern Pro Mod and other cars for ventilation and pressure equalization. Photo Etched, (2 pr) 

Small Detailing Wire

Small gauge detailing wire for ignition items, lights, gauges and other smaller electrical loads. Available in Black, Blue and Yellow. One package contains 3' x .007" diameter wire. Specify color.

Soft Line - Hose .157", 4mm OD & Roll Bar Padding in 1/16

This is a large, soft, rubber tubing (hollow) that is easily configured to the space you have. It's able to bend at a sharp angle without kinking or folding.I do not have Hex Fittings for this soft line. This soft line equals the following equivalent 1:1...

Soft Line - Hose .066", 1.7mm OD x .039, 1mm ID

This is a soft rubber tubing (hollow) that is easily configured to the space you have. It's able to bend at a sharp angle without kinking or folding.See Hex Fittings sized at .080 for this soft line. This soft line equals the following equivalent 1:1...

Brake or Fuel Line .016", .4mm Dia

  This hard line equals the following equivalent 1:1 size at each scale. 1/25 scale = 3/8"1/16 scale = 1/4"1/12 scale = 3/16"1/8 scale  =  1/8" Depending on your scale, typical uses are injector lines from distribution blocks into a...

Fuel or Brake Hard Line .020, .52mm Dia

This solid aluminum line is soft to bend and will not kink, even at tight angles. It straightens out easily and will conform to any shape you want.This aluminum 'hard' line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/2"1/16...

Dirt Suspension Mount Kit, Brass 1/16

There are enough parts included for two cars. Kit includes:2 Rear 4-Link Mounts5 Rear Shock Mounts3 Upper Front Shock Mounts2 6th Coil Mounts4 Lower front shock Mounts4 Lift Bar linkage Mounts8 Shifter Linkage Mounts The photo below is a work-in-progress...

Current Style Drag Racing Contingency Decal Sheet 1/16

1/16 scale decal sheet with many current drag racing sponsors and manufacturers. These decals would mostly be found on the exterior of the car.Also has Hoosier and Goodyear tire decals.New from SLIXX Decals.One sheet.

Nostalgia Drag Racing Contingency Decal Sheet 1/16

1/16 scale Nostalgia Drag Racing Contingency decal sheet.Includes many sponsors' and manufacturers' names from the past.New from SLIXX Decals.One sheet.

Drag Racing Goody Decal Sheet 1/16

1/16 scale Drag Racing GOODY decal sheet. Includes many sponsors' and manufacturers' names. Nitrous labels, bellhousing logos, fire bottle labels, MSD logos, NHRA & IHRA decals, blower belt and valve cover decals plus lots more.New from SLIXX Decals...

Funny Car Grill & Headlights Decal Sheet 1/16

1/16 scale grille and headlight decals for current and nostalgia drag racing cars.One sheet.SLIXX Decals, 1/16 scale

Barry Grant DEMON 4bbl Carburetor 1/16

Detailed Barry Grant 4bbl CarburetorWith single or dual carbs, you'll need Pro Tech's 1/16 scale Fuel Junction Block.Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the T fitting to split the fuel line to each carb. One...

Holley Dominator 4bbl Carburetor 1/16

Detailed Holly Dominator 4bbl CarburetorWith single or dual carbs, you'll need Pro Tech's Fuel Junction Block.Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the T fitting to split the fuel line to each carb. One per...

Drag Racing Full Face Helmet 1/16

Detailed Full Face Helmet. Ready for your custom paint design.  Looks right at home on the cockpit seat or the hood of that Pro Mod car. One per package. Resin

Barrel Valve 1/16

A barrel valve is located on the left side of a supercharged engine injector hat. The fuel input is via a braided line from the fuel pump and 2 outlet braided lines go to 2 fuel junction blocks (see ENGINE DETAILING).Designed for Pro Tech .035 Braided...

Dual Remote Oil Filter 1/16

Each package contains 1 adapter and 2 oil filters.   See the Braided Lines and Fittings to complete the plumbing of the oil lines. Adapter is metal cast and can be polished.  Filters are machined aluminum   

Aluminum Oil Filter 1/16

Each package contains 1 filter. Machined aluminum  

MSD 7 Ignition Box 1/16

Each package contains 1 MSD 7 ignition box. See 'Detailing Wire, Small' to enhance this item.Resin