Holley Dominator & PE Details, Pair 1/25

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage Contains 2 carbs and PE details.   Photos of completed carbs are for illustration only. Assembly required. Resin and...

Hurst Shifter Set 1/25

This iconic shifter was THE shifter for drag racing, muscle cars, gassers and street machines in the '60's. Includes 3 different arms and shifter linkage. You'll find various shifter knobs here...

Injector Butterfly Set for Competition Resins Enderle Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins Enderle injector hat (part #035).  Click...

Injector Butterfly Set for Competition Resins Injector Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resin's '70's Ribbed injector hat...

Injector Butterfly Set for Competition Resins Shotgun Hat 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Competition Resins 2-Hole Shotgun injector hat (part #148). ...

Injector Butterfly Set for Flash Point FC Engine 1/16

These Butterflies are finely detailed showing the cross shaft and screws holes for each butterfly disc. They are made to fit the Flash Point injector hat that comes with their 526 FC engine. ...

Ladder Bar Set 1/25

Ladder bars were a popular means of improving traction on early pro stock cars, as well as more modern bracket and class cars. This ladder bar set has everything you need   It includes all...

Lenco Shifter Lever Set 1/16

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers and will work with the TDR or Flash Point Lenco...

Lenco Shifter Lever Set 1/25

You need a set of these Lenco shifters for your Pro Mod or other drag car.  Adds realism and detail to your build. Contains set of levers, brackets, linkage and instructions.. Make sure you...

Lenco Transmission Multi Speed with Reverse 1/25

This is a complete Lenco transmission configured for 4-speeds with reverse. It is a one-piece unit, but can be cut down to represent 2 or 3 speeds. The front section contains gears 1 and 2 and...

Lever Latch 5-Way Racing Harness 1/25

The origins of this style racing harness hardware dates back to WWII.  It is still available and widely in use today.  These 1/25th scale sets replicate the basic style of hardware used...

Liberty Shifter Directions 1/25

Here are detailed instructions for assembling Futurattraction's 1/25 scale Liberty Transmission Shifter. The 1/25 scale Liberty Shifter can be downloaded here.        

Liberty Transmission & Shifter Set 1/16

Liberty 5-speed clutchless transmission and photo etched lever set for Pro Stock or other race class up to 3000 HP. Scott, at Futurattraction, took the measurements right off of a real Liberty...

Liberty Transmission 1/16

Liberty 5-speed clutchless transmission for Pro Stock or other race class up to 3000 HP. Scott, at Futurattraction, took the measurements right off of a real Liberty tranny.  You can't get more...

Liberty Transmission 1/25

This is a replica of the Liberty 5-speed Clutchless transmission. Scott, at Futurattraction, took measurements directly from a real Liberty transmission. It doesn't get any more authentic than this...

Liberty Transmission Shifter Kit 1/25

This is a standalone shifter kit for a Liberty transmission.                 Photo of real shifter.              I'll...

M/T Sportsman 4-Tire Set 1/25

This treaded 4-tire set includes 2 M/T Sportsman Pro tires that are based on 29 x 12.5-15 rear tires and 26 x7.5-15 fronts.   They'll also look great on a street rod or street machine. ...

Narrowed 9" Rear End & Brake Kit 1/25

Here is a complete 9" Ford OEM-style narrowed rear end with brakes. Kit includes: Narrowed housing Housing ends including one spare Resin brake hats Resin calipers PE drilled rotors PE...

NoS or Fire Aluminum 2-Bottle Set with Upright Holder 1/25

You won't find a more realistic upright nitrous oxide bottle set than this one.  Use one as a fire bottle if you have a plumbed fire suppression system. These 10 lb bottles are made for an...

NoS or Fire Aluminum Bottle Set with Bracket 1/25

You won't find a more realistic nitrous oxide bottle than this one.  Use one for a fire bottle if you have a fire suppression system plumbed. (The photo shows a resin bottle and valve, but the...

Oval Exhaust Bezels Doorslammer, ProMod, 1/25

These bezels are the perfect way to finish the fender exit holes if the headers exit at an angle to the body. They are especially well-suited for Doorslamers or Pro Mods. Round bezels are also...

Oval Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. These are oval, but round bezels are also...

Pedal Set for FC, PM or Door Slammer 1/16

You need a set of these pedels to complete that racing interior and sdd realism and detail to your build.   Contains one each: Accelerator pedal Brake pedal Clutch pedal Pedal foot pads Make...

Pedal Set for FC, PM or Door Slammer 1/25

You need a set of these pedels to complete that racing interior and sdd realism and detail to your build. Enough for two cars or more, depending on how many pedals you need.      ...

Pro Mod / FC Slicks 1/16

If you're looking for the biggest meat to stick under those wheel tubbs, you just found it.  These are the largest 1/16 slicks on the market. There are no raised letters on these slicks...

Pro Touring 4-Link Housing Kit 1/25

This 4-Link kit will give you a lower stance because the 4-link bar is much closer to the axle.  The axle brackets mount on the lower front portion of axle tube housing.  This is a complete...

Rear Tube Frame/Clip .700" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed in FUD material (see below). Dimensions are:Frame width = .700" (about 45/64", 17.8mm)Frame tube diameter = ...

Rear Tube Frame/Clip .800" Wide 1/25

A round-tube rear frame clip ready to install.  It's 3D printed in FUD material. Dimensions are:Frame width = .800"Frame tube diameter = .080"Cross member diameter = .080"Overall length = 2.55"...

Rear Tube Frame/Clip .900" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed in either FUD or WSF material (see below). Dimensions are:Frame width = .900" (about 29/32", 22.9mm)Frame tube...

Rectangular Frame Rails 1/24-1/25

This rear frame rail replicates a mandrel bent rectangular in a 2"x 3" size. Dimensions: Rails are .125" x .080" Cross members are 060" diameter Total length is 2.6"   The rails are 3D...

Round Exhaust Bezels Doorslammer, ProMod, 1/25

These bezels are the perfect way to finish the fender exit holes if the headers exit perpendicular to the body. They are especially well-suited for Doorslamers or Pro Mods. Oval bezels are also...

Round Fender Exhaust Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the bezels used on modern Pro Mod and other cars where the exhaust exits the fender well, just behind the front wheel. The inside diameter is .25". These are...

Round Window Bezels Doorslammer, ProMod, 1/25

These window bezels are intended to add a finished look to the emergency access hole that is required in many doorslammer cars so track personnel can reach through a window to open the door in case...

Round Window Bezels Pro Mod, etc 1/16

These bezels are designed to replicate the window bezels used on modern Pro Mod and other cars for ventilation and pressure equalization. Photo Etched, (2 pr) 

Slotted Rotor 4-Piece Set 1/16

Slotted, 4-rotor set - front and rear. Front rotors equal a scale diameter of 10". Rrear rotors equal a scale 11.75" @ 1/16 scale.   Photo of a real slotted rotor with dual calipers. For a set...

Slotted Rotor 4-Piece Set 1/25

Slotted, 4-rotor set. Front rotors equal a scale diameter of 10". Rear rotors equal a scale 11.75" @ 1/25 scale. These rotors can replace any rotors in Futurattraction's front and rear  brake...