Engine Related

Blower Starter Bracket, 1/16

Unless your blown engine has its own starter, you'll need to start it with a blower starter. This bracket holds the blower starter and will add that special touch of detail to your engine. Here is a photo of a real-world starter. The pins fit into the...

Round Air Cleaner, Spun Aluminum, 1/25

A realistic round spun aluminum Air Cleaner. It has a screen air filter between the top and bottom halves. Dimensions: Diameter - .45" Overall Height - .19"   No assembly required.   By Parts by Parks, 1/25 scale.

3-Pulley Set, 1-Groove 1/25

A set of three spun aluminum V-groove pulleys. Consists of three single groove pulleys. Includes belt material. The package list this pulley set for SBC engines in AMT's '33 Ford (kit #6714) and AMT's '34 Ford (kit #6686) but these can be used on any...

Engine Detailing Kit Plus #2, 1/25

An engine wiring and plumbing kit Consists of: Radiator hose, black Heater hose, red Black detailing wire (battery, ignition, etc) Red detailing wire (battery, ignition, etc) Two sizes of aluminum line  By Parts by Parks, 1/25 scale.

Quick-Turn Fasteners, 1/24-1/25

Your typical Dzus fastener except a little smaller than others which make them less obtrusive. A total of 72 fasteners will go a long way.   By Detail Master, 1/24-1/25 scales.

Dry Sump Oil Resevoir, 3D, 1/25

Pro Stock, Outlaw or super-mean street machine, if you have a dry sump oil system, you need a reservoir tank to hold the oil. This 3D-printed tank is loaded with detail. It includes a filter on the side, inlet/outlet barbs and mounting arms. If you...

BBC Headers, 3D, 1/25

One pair of realistic BBC headers. These don't drop down very far and they are rear exit.   Designed by @Mattys_custom_scale One pair of headers, 3D-printed by 3D Scale Kreations

Detailing Wire .0075", Green

Small dark green wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Chevy 409 4-Pulley Set, 2-Grooves, 1/25

A set of four spun aluminum V-groove pulleys, whether for a 409 or any other engine.. Consists of: 1 Double groove crank pulley 1 Double groove water pump pulley 2 Small single groove accessory pulleys Belt material   Please see the...

Chevy 409 5-Pulley Set, 2-Grooves, 1/25

A set of five spun aluminum V-groove pulleys, whether for a 409 or any other engine.. Consists of: 1 Double groove crank pulley 1 Double groove water pump pulley 1 Large single groove accessory pulley 2 Small single groove accessory pulley Belt...

Injector Stacks - Small 1/24-1/25

Smaller, polished aluminum injector stacks for a Hilborn style induction system. Pack contains 8 stacks, polished aluminum with a flared top. . The stacks are hollow with a 'pin' at the bottom for easy mounting Dimensions per back of...

Lenco Transmission 3-Speed/Reverse, Manual Shift 1/25

This is a complete Lenco transmission configured for 3-speeds with reverse. It is a one-piece unit including 3D-printed shifter levers (the 2 levers are really small and easy to loose). The front section contains gears 1 and 2 and is mandatory...

Lenco Transmission, 3-Speed/Reverse, with Air Shifters 1/25

This is a new and improved Lenco 3-speed transmission which uses a new 3D-printed master. Improvements include: Sharper overall detail More fastener detail Recesses in the top of the cases to fit separate CO2 pods 3D-printed CO2 pods. This...

Lenco Transmission, 4-Speed/Reverse, with Air Shifters 1/25

This is a new and improved Lenco 4-speed transmission which uses a new 3D-printed master. This version is for CO2 shifting and not manual shifting levers.   Improvements include: Sharper overall detail More fastener detail Recesses in the...

Ford Cleveland 351 & Lenco 1/25

An all new, highly detailed complete, 351cid small block Ford engine with Cleveland heads.  Perfect for that '70's to early '80s Pro Stock racer. This engine is designed completely from a real Ford 351.            ...

Black Battery Cables and Hardware Set, 1/25

Here's a complete battery cable set. Includes black wire plus a photo etched plate with battery terminals, hold down straps, aluminum rod for the terminal posts and more. The solid core will hold its shape when formed into place. Each package...

Detailing Wire .0075", Orange

Small orange wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Velocity Stacks, Small, 4bbl Carb 1/24-1/25

Smaller, polished aluminum velocity stacks for a 4bbl carburetor. Pack contains 2 stacks, turned solid aluminum, so there's no seam. The stack is hollowed-out, leaving a solid bottom.  You could drill it out so that you'd be able to see the carb...

Ignition Wire, Gray, .022"

Small solid core gray wire for ignition components as well as any wiring needs. Wire diameter is .022"   One roll, 2' long, by Detail Master.

Detailing Wire .0075", Red

Small red wire can be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteLight BlueDark BlueYellow One package of wire .0057" x 3', by Detail Master

Detailing Wire .0075", Light Blue

Small light blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedYellowDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Yellow

Small dark blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Dark Blue

Small dark blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueYellow One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", White

Small white wire can be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackRedLight BlueDark BlueYellow One package of wire .0057" x 3', by Detail Master

Holley Dominator Carb & PE Details, Pair 1/25

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage.  These carbs were drawn in CAD and capture as many features as possible of Holley's decades-famous Dominator race carb. The carb bodies are 3D-printed and are...

Soft Line - Hose .011", .29mm OD

This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .008" or .20mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 9/32"1/16 scale = 1/12 scale =1/8...

Soft Line - Hose .005", .12mm OD

This is the smallest black soft line I have. This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .0047" or .14mm.  Typical uses are small oil lines, vacuum and fuel lines, especially fuel...

SBC Gasket Set, 1/24-1/25

Great for a show winning engine or a diarama scene. All the gaskets you'd find on a real engine:HeadIntakeExhaustValve CoversTiming CoverCarburetor (2 styles)Fuel Pump GasketFuel Pump Blank Plate (when using an electric fuel pump)Water Pumpand...

Soft Clear Line - Hose .005", .13mm OD

This is my smallest clear line.  You can barely see it, but if you need a really small clear line, this is it.This could be used for a 1/25 radiator overflow tube, small carburetor fuel lines, or other clear line needed.  This soft line is easy...

Header and Exhaust Flange Set - Small, 1/24-1/25

These Detail Master Flanges can be used for your headers, manifolds and tail pipes. Bolt head included as well! Includes several sizes, shapes and diameters to suit any header or exhaust pipe diameter.   Photo etched, by Detail Master,...

Header and Exhaust Flange Set - Large, 1/24-1/25

These Detail Master Flanges can be used for your headers, manifolds and tail pipes. Bolt head included as well! Includes several sizes, shapes and diameters to suit any header diameter.   Photo etched, by Detail Master, 1/24-1/25 scale

8" Diameter Dual Air Cleaners, 1/25

A pair of small air cleaners that will fit a 4bbl carb. It consists of an aluminum top and bottom with screen material.  The top is peaked in the center   Two complete air cleaners, by Detail Master, 1/25 scale.  

Textured Material for Belts, Harness, Restraint and More

This looks like a piece of paper, but it's much more. This is a fine cotton textured paper on one side and when colored with a Sharpie (recommended) the texture is highlighted. It's easily cut to shape with scissors. Use a piece of copy paper as a...

Injector Velocity Stacks 1/25

Shiny aluminum injector stacks (tubes) for that early style Hilborn injected engine. Dimensions:Length: .62", (5/8")Diameter - OD (tube): .125", (1/6") These stacks are hollowed and flared at the top and solid at the bottom They can also be used as...

BBC 572 Tunnel Ram, 2-Carb Engine, 3D 1/25

A 3D-printed BBC 572 with tunnel ram intake and dual carbs. Ideal for that screaming street machine or hot rod. Excellent detail and it has locating tabs for easy assembly and alignment of parts. Engine includes:    572...

Ignition Wire, Red, .016"

Small solid core red wire for ignition components as well as any wiring needs. Wire diameter is .016"   One roll, 2' long, by Detail Master.