1/16 Scale

Billet Specialties CO7 Aluminum Rear Wheels 1/16

A pair of Billet Specialties aluminum rear wheels In 1/16 scale. Here are matching front wheels. These replicate the Comp7 Series 16" x 16" wheels. Three different inserts stack to create a 3-dimentional look with one having a black center. The...

Weld AlumaStar Aluminum 5-Spoke Narrow Front Wheels, 1/16

An excellent reproduction of Weld's AlumaStar 15" x 3.5" spindle-mounted front wheel. Includes three .20" thick 6061-T1 aluminum center inserts that stack for a 3-dimentional look. The outer-most insert is slightly smaller to represent the 'stepped'...

Weld AlumaStar Aluminum Rear Wheels 1/16

A pair of Weld AlumaStar aluminum rear wheels In 1/16 scale. These match Futurattraction's AlumaStar aluminum 5-spoke front wheels.  These replicate Weld's 16" x 16" wheels. Three different inserts stack to create a 3-dimentional look with...

Soft Red Line - Hose .039, 1mm OD

This is a soft, stretchable red line that bends easily and smoothly.  It's able to bend at a sharp angle without kinking. It is bright red and made of Polyester.See .040" Hex Fittings or Size C (or Size D for more space) Ferrules for hose ends.This...

Inline Injectors 1/16

Mark Johnson is a master at designing, and resin casting 1/16 scale parts. This set of four inline injectors is excellently detailed. This injector set is normally found on earlier blown engines. It would sit between the blower and the scoop, like...

HEMI or BBC Oil Pan 1/16

Mark Johnson is a master at designing, and resin casting 1/16 scale parts. This oil pan is an example. I test fitted this pan on a Comp Resins Hemi and a BBC engine. The detailing is excellent.   One oil pan, by Mark Johnson, 1/16 scale.  

Ignition or General Wire, Dark Blue .0194"

This wire can be used for many heavier electrical loads. Scale Motorsport's wire is not as stiff as most other electrical wires. It is .0194" diameter which is equal in real life to just under 1/2" or 12mm at 1/25 scale. At 1/16 scale, this wire would...

Ignition or General Wire, White .0194"

This white wire can be used for many heavier electrical loads. Scale Motorsport's wire is not as stiff as most other electrical wires. It is .0194" diameter which is equal in real life to just under 1/2" or 12mm at 1/25 scale. At 1/16 scale, this wire...

Braided Stainless Steel Cable, Various Sizes

This makes an excellent steel braided line.  It's nylon coated 7-strand stainless steel which can be bent really tight without kinking I've used it for a parachute-release cable from the cockpit parachute release lever to the parachute and it also...

Pinpoint Glue & Weathering Brushes 3-Set

Three long-reach pinpoint brushes with a easy-grip end. Besides using these for Plastic Magic liquid glue, use them for brushing off unwanted Photo Etch glue. Three brushes, by Deluxe Materials

Pin Flow Applicator for Liquid The Glue

For a precise, small application using a needle-tip for no glue runs. I've tried needle-type glue applicators in the past and the problem was that the CA glue would clog before I applied it. Now here is an applicator that works with liquid glue made for...

Plastic Magic Glue 10-Sec Cement

Made specifically for styrene and ABS resin. This actually 'welds' styrene together. For a precise, small application, see the Pin Flow applicator with a needle-tip for no glue runs.  Hazard- free, non-toxic, plastic cement with 2 long-reach...