Competition Resins

Dual Quad Tunnel Ram Manifold 1/25

Set a pair of Dominator or Demon carbs on top of this manifold. Make sure you have room under your hood or cut a hole in the hood to allow for the height. Overall height is .43" (7/16"). Here's a...

Enderle Hat 1/25

A 3-hole late model Enderle injection hat.Molded in one piece. Contains 1 resin hat, 1/25 scale, by Competition Resins.

ET III Style Rear Wheels 1/16

ET III 'Bear Claw' style 2-piece rear drag racing wheels. Fits Revell tires.                                Photos...

ET III Style Rear Wheels 1/25

ET III 'Bear Claw' style rear drag racing wheels. Popular in the '60's on street and drag machines.                         Photos of...

Fenton/Anson Front Wheels 1/25

A pair of 5-slot Fenton (or Anson) front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Gasser Front Wheels, but these have larger slots  OD = .67",...

Fiat Fuel Altered Body 1/25

  An iconic drag racing body from the early '60's to today. Newer versions use a longer wheelbase for more stability. Features: One-piece body Use a Modified Early Model Revell Funny Car...

Firestone Champion Front Tires, 1/25

These narrow front tires will work for a Gasser as well as a street racer. Has Firestone in raised letters on sidewall (one side only). Soft pliable rubber. Contains a little 'flash' which is...

Front Engine Fiat Dragster Body 1/25

A front engine Fiat drag racing body from the early '60's to today. Features: One-piece body Use AMT Front Engine Dragster kit for Chassis Body Color - White   One resin body with...

Gasser Slotted Front Wheels 1/25

A pair of 5-slot front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Fenton Front Wheels, but these have slightly smaller slots    One pair of...

GM 700R Transmission 1/25

A General Motors trick 700R automatic transmission. Contains 1 resin transmission, 1/25 scale

GM TH350 3-Speed Transmission 1/25

A nicely detailed General Motors 350 Turbo Hydromatic transmission. Molded in one piece with bellhousing. By Competition Resins, 1/25 scale

Good Year Dragster Slicks 1/25

These are labeled '60's Goodyear Dragster Slicks but depending on the size you want, these will work for any racer. "Good Year" is in raised letters on both sides. These are slightly smaller than...

Halibrand Front Wheels 1/25

A pair of slotted Halibrand front wheels.     Contains 2 resin wheels 1/25 scale.

HEMI Injector Manifold 1/25

A fuel injector manifold for your HEMI engine.   Here's a fuel plumbing diagram for this manifold.The lines go to a distribution block in the center.      Velocity stacks are...

Holley Dominator Carburetor (Pair) 1/25

A pair of nicely detailed Holly Dominator 4-bbl Carburetors. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines...

Large Tapered Pro Stock Wing 1/25

This wing is fairly large and is straighter along the rear edge than along the front edge. End plates are tapered toward the rear and extend down from the top edge. Measurements: Overall length: 2...

Large, 3-Hole Carbon Fiber Hat 1/24

A three round-hole, tall Injector Hat similar to what you find on TF and PM cars. This is normally a carbon fiber hat in real life.  Search for Carbon Fiber decals in the search box at the top...

M&H Racemaster 'Pie Crust' Slicks 1/25

M&H Racemaster 'Pie Crust' Drag Slicks, black wall. Raised 'M&H Racemaster' lettering on one sidewall. Letters are slightly raised.Fairly soft rubber cast tires. Tire...

M&H Racemaster Drag Slicks 1/16

M&H Racemaster Drag Slicks. Raised 'M&H Racemaster' on sidewall. These are a hard resin and do not have a lot of room for play with wheel sizes. Tire Measurements: Width 1.00",  25...

Milodon Valve Covers 1/25

A pair of really nice Milodon valve covers with spark plug holes already drilled. These valve covers have horizontal grooves running lengthwise. They fit on a BBC engine. Contains 2 resin pieces.

Molded Blower Belt with Pulleys 1/25

A more detailed blower belt set than found in kits. The belt shows cogs on the inside and bolt heads are found on the pulleys. Also has the blower pulley, crank pulley and idler pulley molded in....

MOON 392 HEMI Valve Covers 1/25

A pair of ribbed Moon 392 HEMI valve covers with spark plug holes already drilled. Contains 2 resin pieces.

Motorwheel Pro Stock Wheels Front & Rear 1/25

A set of four Motorwheel P/S Racing Wheels - front and rear. Contains 2 pairs resin wheels, 1/25 scale.

Mustang 2010-12 Pro Mod / Pro Stock Body 1/25

2010-2012 Mustang Pro Stock / Pro Mod Body. Kit includes: Hood Scoop Hood Scoop Blank Rear Wing Clear Headlight and Taillight covers I have a one-piece 3D-printed Resin Chassis for this...

Mustang Tear Drop Hood - Revell 1/25

A tear drop bubble that can be cut out and mounted on your hood or it's made to fit Revell's '65-'66 Mustang.   Here's an example of the hood on a 'Russ Davis Ford' Mustang...

Oil Pan, HEMI 1/16

A flat-style oil pan for a HEMI or BBC   Resin, 1/16 scale.

Outlaw Super Cowl Hood Scoop 1/25

A raised 2-level hood scoop.   Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Pirelli Type Small Front Racing Tires 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer. These are slightly smaller than the Futurattraction Front Runner tires. These are semi hard tires but still flexible...

Pro Mod - Pro Stock Square Opening Hood Scoop 1/25

A raised hood scoop for that PM or PS racer with a square mouth opening. See also similar hood scoops with a Round Opening or 'D-Shaped Opening. Molded in one piece. Contains 1 resin scoop,...

Pro Mod / Funny Car / Pro Stock Rear Wing 1/25

Includes main horizontal wing, sides and support rods. This wing can be made to fit many different race classes.   Here are some examples of what can be done.     Resin, 1/25 scale

Pro Mod / Pro Stock Rear Wing 1/25

A one piece wing with an arch shape and small side spoilers. This is a typical wing for the Stratus body, but it can be made to fit many different cars and race classes. Dimensions: Width 2.5"...

Pro Stock / Super Stock Drag Slicks 1/25

Drag Slicks for your Pro Stock, Super Stock or other race car.  Dimensions are listed below to see if they fit your needs. Each side of these tires will accept a different size wheel. ...

Pro Stock Late Model Seat, 1/24

Here is a one-piece ‘shell’ type seat. Has molded-in padding, harness and buckles. Measurements: Width at Top (widest point) - 0.82” Height - 1.15” Depth - 0...

Pro Stock Late Model Valve Covers 1/25

A pair of Pro Stock valve covers with a flat face. Contains 2 resin pieces.

Pro Stock Style Fuel Cell 1/25

A Pro Stock type Fuel Cell. Contains 1 resin tank, 1/25 scale

Pro Stock/Pro Mod Wing 1/25

This wing has a small arch as viewed from the toop. Has teardrop end plates. Measurements: Overall length: 2.15" Width at end plates: .52" Contains 1 resin piece, 1/25 scale