Detailing Wire .0075", Red

Small red wire can be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteLight BlueDark BlueYellow One package of wire .0057" x 3', by Detail Master

Detailing Wire .0075", Light Blue

Small light blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedYellowDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Yellow

Small dark blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueDark Blue One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", Dark Blue

Small dark blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedLight BlueYellow One package of wire .0075" x 3', by Detail Master

Detailing Wire .0075", White

Small white wire can be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackRedLight BlueDark BlueYellow One package of wire .0057" x 3', by Detail Master

Aluminum Blue Hard Line .034", .88mm Dia

This bright blue aluminum line equals the following equivalent 1:1 size at each scale.1/25 scale = 1 1/4"1/16 scale = 3/4"1/12 scale = 7/16"1/8 scale   = 3/8"Depending on your scale, typical uses are fuel and oil lines. Fuel lines from the fuel pump...

Soft Line, Hollow .068, 1.7mm Dia

This hollow black vinyl line is extremely soft and bends easily. Inside diameter is .031"This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 1 5/8"1/16 scale = 1"1/12 scale = 3/4"1/8 scale  =  1/2"Depending on...

Forward Frame Rail & R&P, .880” Wide, 1/25

 Building your own chassis with a front strut suspension? This Forward Frame Rail will save you a ton of time.This is a one-piece, 3D-printed, front frame and doesn't need any assembly, plus it has a separate rack and pinion with boots. It...

Holley Dominator Carb & PE Details, Pair 1/25

Holley Dominator Ultra Detail Carb Kit with Photo Etch Air Horn and Linkage.  These carbs were drawn in CAD and capture as many features as possible of Holley's decades-famous Dominator race carb. The carb bodies are 3D-printed and are...

Dragster Wire Wheels 20" with Light Shield 1/25

Real wire wheels with real spokes and one wheel has a 'light shield' timing disc on one side for newer/nostalgia dragsters. The light shield provides a larger area to trigger the staging lights and the timing lights at the end of the strip. Fully...

Dragster Wire Wheels with Light Shield 1/16

Real wire wheels with real spokes and one wheel has a 'light shield' on one side for newer dragsters. The light shield provides a larger area for the timing light to trigger at the end of the strip. Fully assembled and includes rubber O-Ring tires...

Dana - Rear End & Brake Kit, Stock Width 1/25

Here is a complete Dana standard width rear end with brakes. The rear end and axle tubes are molded in resin. Overall length between axle tube ends is 2.25" A 'bare' Dana rear without the brake kit is available here. The product photo shows a white...

Weathering Sponge Brush , Fine Tip

This specially designed sponge brush allows extremely detailed weathering work. This fine sized brush tip is 'arrow' shaped and flat. Made to apply Tamiya's popular Weathering Master material. Resilient sponge brush features long...

Weathering Sponge Brush , Medium Tip

This specially designed sponge brush allows extremely detailed weathering work. This medium sized brush tip is 'heart' shaped and flat. Made to apply Tamiya's popular Weathering Master material. Resilient sponge brush features long...

6 Drill Bit Pack #60 - #70

Here is a plastic tube containing 6 small drill bits - probably those you break so easily. 6-piece pack of fine high speed steel drill bits Includes six drills #60 through #70. Used with: wood, resin, jewelry, walnut, amber, beeswax, olive nut,...

Pin Vice with 12 Drill Bits #50 - #80

Mini Pin Vise with 12 Assorted Drills Handle made of anodized aluminum This pin vise has a permanent self-centering aluminum chuck that accommodates drills #50 (.0700) through #80 (.0135).  Includes 12 assorted drills that easily...

12 Drill Bit Pack #60 - #70

Here is a plastic tube containing 12 small drill bit - probably those you break so easily. 12-piece pack of fine high speed steel drill bits Includes drills #60 through #70. Used with: wood, resin, jewelry, walnut, amber, beeswax, olive nut,...

Halo Billet Steering Wheel 1/24-1/25

A custom billet steering wheel. Includes a horn button and other detailing items with instructions. The product photo above makes one ring look like rubber, but all are actually stainless steel.  This can be left as is or painted.  Makes one...

Micro Metal Foil Adhesive

Microscale's Micro-Adhesive is a Foil Adhesive and is a very easy and inexpensive way to apply aluminum foil or Bare-Metal Foil. The most common foil is ordinary household Aluminum foil, which most people have in their homes. This can be used for...

Front Engine Dragster Chassis, 1/24-1/25

A ready-made chassis for a front engine dragster. Includes: Frame rails Firewall Body panels Hood Instrument panel Instructions Wheelbase is about  3.5". All parts are molded in white.   One complete FED chassis, by Gofer Racing,...

Panel Scriber Tool

A necessary tool for every builder. After a few coats of paint, the panel lines get fiied in and don't look realistic  Run the scriber over the panel lines before painting to highlight them after painting. Plus, sanding the body to prepare it for...

Drag Racing Tire Decals #1, 1/25

Racing tire manufacturers, in yellow and white, are included in various sizes for each one. Includes (in yellow): Goodyear (three sizes) Eagle (two sizes) Includes (in white) M/T (three sizes) Goodyear (three sizes) Eagle (three...

Drag Racing Tire Decals #2, 1/25

Some the racing tire manufacturers are included in four sizes for each one. Includes (in white): Hoosier Firestone M&H Racemaster Drag 500 Shown in color for body decals: RaceMaster (two designs) Firestone (three designs) Hoosier (two...

Skulls, Skeletons, etc Decals, 1/25

An entire sheet of skulls and skeletons shown in various ways. Includes two of every design. Skulls with pistons, flames, checkered flags, dice and cards, snakes and even one that appears to be melting. Also includes various skeletons in different...

Soft Line - Hose .011", .29mm OD

This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .008" or .20mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 9/32"1/16 scale = 1/12 scale =1/8...

Soft Line - Hose .005", .12mm OD

This is the smallest black soft line I have. This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .0047" or .14mm.  Typical uses are small oil lines, vacuum and fuel lines, especially fuel...

68 Dana Camaro Hood 1/25

A split double intake hood to replicate the 1968 Dana Camaro. Here's an example of the hood on a Dana Camaro.           Contains 1 resin hood, 1/25 scale

M/T Treaded Pro Street/Sportsman Rear Tires, Pair 1/25

This treaded M/T Pro Street/Sportsman tire set is based on a 29 x 12.5-15 tire, They'll also look great on a street rod, rat rod or a mean street machine. They are designed to fit 1/25th scale wheels.  Tire width is ~.400" Rear tire is...

Front Engine Fiat Dragster Body 1/25

A front engine Fiat drag racing body from the early '60's to today. Features: One-piece body Use AMT Front Engine Dragster kit for Chassis Body Color - White   One resin body with included items as outlined, 1/25 scale, by Competition...

Aluminum Distributor Body 1/25

This is the same Pro Tech distributor body used in their pre-wired distributors. This is the body without the spark plug wires.  You may have your own wires you want to use. A hole is provided in the top.   Contains 1 machined aluminum...

Black & White Checkerboard Squares, Decal, 1/25

An entire sheet of black & white squares. Use them on your firewall or maybe a diorama floor. There are 8 squares per linear inch and 64 squares per square inch.   Measures 7" x 4.75" One decal sheet, by Gofer Racing, 1/25 scale.

Headlight, Spot Light, Speaker Rectangular Screens 1/24-1/25

Photo etched set of rectangular screens with square holes to protect exterior items from being damaged. They can be cut to size to make your own gas/brake pedals or maybe a rat rod air vent. Can also be used for speaker grilles. The set contains 4...

Burnt Color Weathering Set 'D'

This will give you the hot metal look on exhaust pipes, mufflers and other hot parts. Use a combination of the three colors provided to represent different shades of hot metal. Simply brush them on your painted item. The hottest areas are at the bends...

Blower 14-71, 1/16

A nice 14-71 blower with an end plate and front plate including a cogged pulley   Resin, 1/16 scale, by Competition Resins.

Gasser & New Graphics Decal Sheet #2, 1/25

1/25 scale mini decal sheet with Gasser graphics plus a few sponsors for newer cars or rat rods. Includes (2 of each)  M&H Racemaster "Gas Chamber" "The STRIP Teaser" Moon Eyes New York National Speedway logo "Rapid Ronnie" A/Gas,...

American Trak Star Rear Wheels, 1/25

American Racing TrakStar Rear Wheels in 1/25 scale   Brand new and I only have a limited quantity to start with. These American Racing rear wheels match the Trak Star front wheels. Here's a  photo of the real wheel with a beadlock ring...