Engine Detailing

Clutch Can BBC-SBC 1/25

 Here is an item every race car needs and is required in almost all NHRA classes. This clutch will contain a clutch/flywheel explosion. This is a replica of a real world Trick Titanium clutch can and matches the bellhousing pattern on BBC and SBC...

Radiator Shroud Set 1/25

Here is a combination of a resin radiator, shroud and and fan-surround.    Radiator dimensions: Width at the base is 1.06" Depth (front to rear) is .420" The ID at the rear most part of the fan enclosure is .615".   3 resin pieces,...

8" Diameter Dual Air Cleaners, 1/25

A pair of small air cleaners that will fit a 4bbl carb. It consists of an aluminum top and bottom with screen material.  The top is peaked in the center   Two complete air cleaners, by Detail Master, 1/25 scale.  

Velocity Stacks, Small, 4bbl Carb 1/24-1/25

Smaller, polished aluminum velocity stacks for a 4bbl carburetor. Pack contains 2 stacks, turned solid aluminum, so there's no seam. The stack is hollowed-out, leaving a solid bottom.  You could drill it out so that you'd be able to see the carb...

Round 9" Aluminum Air Cleaner 1/25

This machined aluminum air cleaner measures 9"w x 2"h. It would be typically be found on a single carburetor.Includes photoetched wing nut and simulated filter element. Photo of a 14" air cleaner showing an added fine mesh screen available here,...

Dry Sump Oil Reservoir, 1/25

This dry sump oil reservoir is modeled after a Moroso 22612. Includes a hole in the bottom for an oil line. Product photos show a painted version. Item is 3D-printed in black resin. Check out this free Dry Sump Oil diagram for proper plumbing...

Timing Covers, Pump, T'Stat, Balancer, 1/25

This combination will detail the front of your SBC or BBC engine. CONTAINS: 2 Timing Covers, different size to fit different enginesMechanical Water PumpHarmonic BalancerThermostat Housing NOTE: Current product photo does not show all items...

Engine Pulley Set, Star Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has a spoke or star pattern plus a...

Engine Bay Tin, '69 Camaro 1/25

This tin work fits Revell's 1969 Camaro. Great for that pro street or race car look!t This is a Tight fit and may require a bit of filing on the outer edges.   Photo etched, 1/25 scale, by Futurattraction.

Detailing Wire .0075", Light Blue

Small light blue wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: BlackWhiteRedYellowDark Blue One package of wire .0075" x 3', by Detail Master

Spark Plug Boots 90-Deg, 3D, 1/25

A package of nine, black, 90-degree, 3D-printed spark plug boots. Paint them your desired color. Enough for eight spark plugs boots at the distributor, plus one boot for the coil wire.  You will need another set of boots for the spark plugs at...

4-Pulley Set, 1-Groove, Flathead or Other 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four single groove pulleys: Crank pulley Water pump pulley Fan...