Engine Detailing

Ignition Wire, Red, .016"

Small solid core red wire for ignition components as well as any wiring needs. Wire diameter is .016"   One roll, 2' long, by Detail Master.

Radiator Shroud Set 1/25

Here is a combination of a resin radiator, shroud and and fan-surround.    Radiator dimensions: Width at the base is 1.06" Depth (front to rear) is .420" The ID at the rear most part of the fan enclosure is .615".   3 resin pieces,...

Spark Plug Wire Loom Set, Modern 1/24-1/25

This is referred to as 'Street Rod' Wire Looms, but the designs and shapes included could be the perfect fit for your engine. Includes four pairs of different styles, plus the typical wire separators for one to four wires. These have a good shine to...

Aluminum Pulley 4-Set, 1 & 2-Grooves, 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four pulleys in three sizes: Crank pulley (2-grooves) Water pump...

Aluminum Pulley 4-Set, 1-Groove, 1/25

A set of four spun aluminum V-groove pulleys. This is packaged as a Flathead pulley set but can be used for most any engine requiring smaller single groove pulleys. Consists of four single groove pulleys in two sizes: Crank pulley Water pump pulley Fan...

Pro Street License Plate Decal 1/25

A pair of license plate decals with PRO STREET written on the face. These are New Your plates with a red Statue of Liberty on the left side. The lettering is in blue.   Two decals on one sheet, by VCG Resins, 1/25 scale

Soft Line - Red .016", .4mm OD

This is a small, soft, solid, semi-shiny line.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 3/8"1/16 scale = 1/4"1/12...

Soft Black Line - Hose .016", .4mm OD

This is a small, soft, solid, semi-shiny line. Can be used for real life 9mm spark plug wires. They would drape like the real thing. It's the perfect size for those small injector lines to the manifold and injector hat. It can bend at a sharp angle...

Soft Clear Line - Hose .008", .2mm OD

This is really small, soft, solid, clear line . You can barely see it, but if you need a really small clear line, this is it.This could be used for a 1/25 radiator overflow tube, small carburetor fuel lines, or other clear line needed.  This soft...

Soft Clear Line - Hose .012", .3mm OD

This is a pretty small soft, solid, clear line . It's the perfect thing for those small fuel lines at the engine.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following...

Engine Pulley Set, Star Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has a spoke or star pattern plus a...

Engine Pulley Set, Circle Design, 1/25

A different type of pulley set. These are photo etched and the pieces stack to give the pulley depth. You could also cut a piece of round styrene or aluminum rod or tube as a spacer between the pulley faces. Pulley face has 6 round holes plus a hole in...