Engine Related

Soft Clear Line Hose .028", .7mm

This is a soft clear line and easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing. It will drape like an actual line.  Depending on your scale, it's excellent for carb fuel lines, radiator overflow...

Mallory/MSD Ignition Coil 1/16

Modeled after a Mallory Ignition Coil. Also looks very similar to a MSD Ignition Coil. Photo of completed piece is for reference only. Painting, wires and decals are not included. Each package contains 1 coil. Resin 

Brake or Fuel Line .016", .4mm Dia

  This hard line equals the following equivalent 1:1 size at each scale. 1/25 scale = 3/8"1/16 scale = 1/4"1/12 scale = 3/16"1/8 scale  =  1/8" Depending on your scale, typical uses are injector lines from distribution blocks into a...

Soft Line - Hose .010", .25mm OD

This is a black nylon-coated stainless steel multi-strand wire. It is slightly springy and can be bent at sharp anglesThe OD dimension is .010" or .25mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 1/4"1/16...

Holley Dominator 4bbl Carburetor 1/16

Detailed Holly Dominator 4bbl CarburetorWith single or dual carbs, you'll need Pro Tech's Fuel Junction Block.Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the T fitting to split the fuel line to each carb. One per...

Soft Line - Hose .011", .29mm OD

This is a shiny black nylon line. It is slightly springy and can be bent at sharp anglesThe OD dimension is .008" or .20mm.  This soft line equals the following equivalent 1:1 size at each scale.1/25 scale = 9/32"1/16 scale = 1/12 scale =1/8...

Soft Line - Hose .157", 4mm OD & Roll Bar Padding in 1/16

This is a large, soft, rubber tubing (hollow) that is easily configured to the space you have. It's able to bend at a sharp angle without kinking or folding.I do not have Hex Fittings for this soft line. This soft line equals the following equivalent 1:1...

Soft Black Line - Hose .016", .4mm OD

This is a small, soft, solid, semi-shiny line. Can be used for real life 9mm spark plug wires. They would drape like the real thing. It's the perfect size for those small injector lines to the manifold and injector hat. It can bend at a sharp angle...

Soft Clear Line - Hose .012", .3mm OD

This is a pretty small soft, solid, clear line . It's the perfect thing for those small fuel lines at the engine.  It can bend at a sharp angle without kinking.See Size A1 Ferrules for this soft line. This soft line equals the following...

Soft Clear Line Hose .078, 2mm OD .059, 1.5mm ID

This a soft clear tubing (frosted, not see-through) that is easily configured to the space you have. It's able to bend at a fairly sharp angle without collapsing.   This is hollow (.059", 1.5mm ID) and the open ends make it easy to attach to objects...

Soft Clear Line - Hose .008", .2mm OD

This is really small, soft, solid, clear line . You can barely see it, but if you need a really small clear line, this is it.This could be used for a 1/25 radiator overflow tube, small carburetor fuel lines, or other clear line needed.  This soft...

Blower Belt, 1/16

This 1/16th scale ribbed blower belt fits Revell Hemi engines, as well as other engines, but the pulley cogs may be different.  It is cast out of urethane rubber and stretches enough to fit nicely over the kit pulley setup.  It can fit...