Shop by Manufacturer

Pro Mod / Funny Car / Pro Stock Rear Wing 1/25

Includes main horizontal wing, sides and support rods. This wing can be made to fit many different race classes.   Here are some examples of what can be done.     Resin, 1/25 scale

Blower Restraint Plate, 1/25

This restraint plate sits under the blower and restraint straps would fasten to the slots and go over the blower to hold it down in the event it would blow up. It is universal to all blowers. This photo etched piece is etched out of .006" nickel-silver...

Cam Lock Safety Harness Set 1/16

Here is a set of highly detailed cam-lock safety harness hardware. Belt material is not included. Assembly required.   Photo etched pieces are made from .015" nickel-silver plate, 1/16 scale.      

Dragster Wire Wheels with Light Shield 1/16

Real wire wheels with real spokes and a separate 'light shield' to be mounted on one side of one wheel. The light shield provides a larger area to trip the timing light at the end of the strip. Fully assembled and includes rubber O-Ring tires...

Fenton/Anson Front Wheels 1/25

A pair of 5-slot Fenton (or Anson) front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Gasser Front Wheels, but these have larger slots  OD = .67", 17mm Overall Width = .19", 5mm   The wheels that will...

Weld V-Series Rear Wheels 1/24

A pair of Weld V-Series rear wheels.Includes: Deep Outer Rims Inner and Outer Center Inserts Instructions Wheel dimensions:Width .730"Outside Diameter .730" Note the difference between the 1/24 version (left) and the 1/25 version (right) below...

Cragar 15" SuperTrick Wheels 4-Set, Hub 1/24

A highly detailed set of front and rear Cragar Super Trick wheelsThese Cragar's replicate 15" wheels used on 1970s-80s era drag cars.  Crowned centers are present on both front and rear wheels, with double-drilled pattern on rear wheels. Inner and...

Rust Streaks Weathering by AK Interactive, FREE

This is a FREE downloadable PDF file for weathering rust effects using AK Interactive's Rust Streaks Weathering Set. You don't have to buy anything to download this file, but you still have to go through the checkout procedure. Just add this to...

70's Pro Stock Front Tires - Firestone Drag 500 / Goodyear, 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer.   Has Firestone Drag 500 & Goodyear MarkingsCast from Medium Soft Rubber These are semi hard tires but still flexible. Measurements:Outside Diameter = .1...

Rear Tube Frame/Clip .700" Wide 1/25

Here's  a round-tube rear frame clip ready to install.  It's 3D printed in FUD material (see below). Dimensions are:Frame width = .700" (about 45/64", 17.8mm)Frame tube diameter = .080"Cross member diameter = .063"Overall length = 2.55" Two...

Small Multi-Use Springs, Throttle/Hood/Brake (pair)

Two small springs for throttle linkage or to hold those semi tractor air hoses.Depending on your scale, these could be used for brake pad springs or hood-hinge springs.Spring length is .25"Contains two (2) steel springs, compression type, by Model Car...

State License Plate Set 1/25

State license plates for added realism.   Plates included are: ArizonaCanadaColoradoFloridaIllinoisMichiganMarylandNew JerseyNew YorkTennessee Also, see the license plate frames.   One set of 16 plates printed on paper, by Pro Tech.