1/25 - 1/24 Scale

Fuel Cell, Small 1/25

A rectangular fuel cell, most often mounted in the trunk of a doorslammer or mean street machine. For drag racing or street machines. Nicely detailed. DIMENSIONS: Width - .68", 17.3mm Depth - .57", 14.6mm Height - .32", .80mm   Contains...

Ignition or General Wire, White .0194"

This white wire can be used for many heavier electrical loads. Scale Motorsport's wire is not as stiff as most other electrical wires. It is .0194" diameter which is equal in real life to just under 1/2" or 12mm at 1/25 scale. At 1/16 scale, this wire...

Firestone Champion Front Tires, 1/25

These narrow front tires will work for a Gasser as well as a street racer. Has Firestone in raised letters on sidewall (one side only). Soft pliable rubber. Contains a little 'flash' which is easily removed. Measurements: Outside Diameter = .1...

Mud Flaps or Anti-Sail Weights 4-Pair 1/24-1/25

A set of photo etched weights to keep big rig mud flats from sailing. Can also be mounted behind pickup rear tires. Contains enough for 8 wheels. They can be painted or left 'bare' for that aluminum or chrome look.   By Detail Master, 1/25...

Pin Flow Applicator for Liquid The Glue

For a precise, small application using a needle-tip for no glue runs. I've tried needle-type glue applicators in the past and the problem was that the CA glue would clog before I applied it. Now here is an applicator that works with liquid glue made for...

Plastic Magic Glue 10-Sec Cement

Made specifically for styrene and ABS resin. This actually 'welds' styrene together. For a precise, small application, see the Pin Flow applicator with a needle-tip for no glue runs.  Hazard- free, non-toxic, plastic cement with 2 long-reach...

Meyers Manx Off-Road Dune Buggy, 1/25

Meyers Manx is a very popular 'Buggy'. Build it for off-road racing, or street fun. Start with a VW chassis and twin-carb engine. Build it with or without the body and it also has an optional top. Firestone All Terrain T/C tires are on chrome...

Aluminum Hard Line .118", 3mm OD

This is a solid aluminum line that can be configured to the space you have. It's able to bend at a sharp angle without kinking. This is a large diameter line and although it's pliable, it requires a tool or object to bend it around if you want sharp...

Snack Manufacturer Decal Sheet, 1/25

This decal sheet is perfect for trucks, vans or a diorama. These could also be mounted on a dirt track racer or gasser. Most of the decals are duplicated so that you can place one on each side of a truck. Also, mount one on a small piece of sheet...

Dale Earnhardt’s Pre-Painted #3 NASCAR Monte Carlo 1/24

Dale Earnhardt - The ‘Intimidator’ with 63 wins and 7 championships, including Daytona. This body is already professionally painted and all decals are already applied. This makes a great static model for viewing. Box is unopened, sealed...

Brake Kit, Slotted Rotor .125" - Rear 1/25

A detailed complete rear end brake set. This slotted rotor set is designed to work with a .125" diameter kit axle but allows the use of separate calipers and PE brackets, for more realism. Kit includes: 3D calipers (2 pieces per...

Brake Kit, Slotted Rotor .063" - Rear 1/25

A detailed complete rear end brake set. This slotted rotor set is designed to work with a .063" diameter kit axle but allows the use of separate calipers and PE brackets, for more realism. Kit includes: 3D calipers (2 pieces per...