Engine Related

Distributor, Black Cap, 90-Degree Boots 1/25

An authentic looking distributor with 90-degree black boots at the cap and straight black boots at the spark plug end. Includes a nicely detailed cap, base and aluminum stem along with pre-assembled spark wires with boots 90-degree black boots are...

Nut & Bolt Set - Photo Etched

Photo Etched bolt and nut flat heads,  Nut features a protruding bolt. Offered in 3 sizes to fit your needs. The dimension is measured across the flats.Mounted on a soft back so no cutting of parts is necessary (means less lost...

Detailing Wire .0075", Black

Small black wire to be used for ignition wiring, computer connections, gauges, etc. Bends easily and holds its shape.Also available in the following colors: WhiteRedLight BlueDark BlueYellowOrange   One package of wire .0075" x 3', by Detail...

Battery Cables with Terminals, Pre-Made 1/25

Every car has battery cables and this will really add detail to your engine bay. Long black and red leads with realistic 3D-printed terminals. Also includes photo etched battery hold-down brackets, one of which is to be folded to 90degrees. Available...

Blower Restraint Straps & Harness/Seat Belt Material 1/25

A material that has multiple uses. Use this material for blower restraint straps or seat belts and racing harness belts.  It has the satin fabric texture needed for realism. The harness buckle set shown for reference only in the above photo is Pro...

Barry Grant DEMON 4bbl Carburetor 1/25

Detailed Barry Grant 4-bbl Carburetor.With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING).Photo shows a real Demon carb for reference only. Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the...

Pro Mag 44, Ignition & Electrical Diagrams

Nothing brings a drag racing model engine to its realism potential more than wiring. You will glance over an empty engine, but you will do a double-take when it is detailed with wiring and plumbed with fuel and injection lines. Here is a FREE...

Holley Dominator Carburetor (Pair) 1/25

A pair of nicely detailed Holly Dominator 4-bbl Carburetors. With single or dual carbs, you'll need a Fuel Junction Block (see ENGINE DETAILING). Also see the Braided Lines, Hard Lines, Soft Lines and Fittings along with the SMALL or LARGE 'T' fitting...

Throttle Linkage Set, 1/25

A throttle linkage set with pins added to the ends of the linkage components. This will provide a more stable attachment point for linkage rods, etc. Depending on your attachment, the pin may have to be bent 90 degrees.   Photo etched...

Digital Gauge Cluster, 1/25

Totally new resin backing and digital insert A digital gauge cluster for that Pro Mod or other race machine. Includes resin backing plate and color digital gauge insert.     By VCG Resins by Reese, 1/25 scale.    

Fuel Line (solid core) 1/25

This line can be used for fuel, oil, water or other transfer hoses.It has a solid copper core to hold its shape.Use hex fittings sized at .025".Each package contains one coil .024" x 3', color black, by Pro Tech.

Spark Plug Boots 90-Deg, 3D, 1/25

A package of nine, black, 90-degree, 3D-printed spark plug boots. Paint them your desired color. Enough for eight spark plugs boots at the distributor, plus one boot for the coil wire.  You will need another set of boots for the spark plugs at...