Competition Resins 1/25 Scale

Cragar 70's P/S 4-Wheel Set 1/25

A set of four Cragar Pro Stock Racing Wheels. The deep rear wheels could be used on a street rod, rat rod or other street machine. These Cragar's were popular in the 70's in Pro Stock class.   Contains 2 pairs of resin wheels, 1/25 scale.  

Tall 4-Hole TF-PM Hat #1 1/25

A four square-hole, tall Injector Hat similar to what you find on TF and PM cars Molded in one piece. Contains 1 resin hat.

BBC Milodon Valve Covers 1/25

Tall Milodon valve covers with MILODON spelled out. These valve covers have horizontal grooves running lengthwise. Contains 2 resin pieces.

BBC M/T Valve Covers 1/25

A pair of BBC or HEMI valve covers with a filler cap on the end of each one. Contains 2 resin pieces.

Altered or Small Wing 1/25

A small wing for any use, but a fuel altered is an example. Has teardrop end plates. Measurements: Length: 1" Width: .62" Contains 1 resin piece, 1/25 scale

Top Fuel Wheel Set 1/25

A set of four Racing Wheels for a TF dragster - front and rear. Features a thin front wheel with a deep rim in order to make sure the timing lights are tripped at the end of the quarter mile. The 2-piece front wheel will accept the 'bicycle tire' found...

Fenton/Anson Front Wheels 1/25

A pair of 5-slot Fenton (or Anson) front wheels. Popular on gassers, super stock or pro stock cars. These are similar to the Gasser Front Wheels, but these have larger slots  OD = .67", 17mm Overall Width = .19", 5mm   The wheels that will...

S.C.O.T Blower 1/25

Here's a special blower for that Flathead engine. S.Co.T. is an abbreviation for 'Supercharger Company of Turin' (Torino), Italy. It was one of the most popular "roots" style blowers in the 1950's and popular today on Street Rods and Rat Rods...

GM TH350 3-Speed Transmission 1/25

A nicely detailed General Motors 350 Turbo Hydromatic transmission. Molded in one piece with bellhousing. By Competition Resins, 1/25 scale

Pirelli Type Small Front Racing Tires 1/25

These front tires will work for a Gasser as well as a Pro Mod or street racer. These are slightly smaller than the Futurattraction Front Runner tires. These are semi hard tires but still flexible. Measurements:Outside Diameter = .98"Overall width = ...

Good Year Dragster Slicks 1/25

These are labeled '60's Goodyear Dragster Slicks but depending on the size you want, these will work for any racer. "Good Year" is in raised letters on both sides. These are slightly smaller than the Comp Resins' Pro Stock slicks. These are fairly...

Dodge 'Red Ram' HEMI Valve Covers 1/25

A pair of Dodge HEMI valve covers with lettering. DODGE and Red Ram are printed in raised lettering. The Dodge HEMI Red Ram was the most powerful stock engine in the '50's. Here are 2 real life examples.   Contains 2 resin pieces.

Pro Mod / Pro Stock Rear Wing 1/25

A one piece wing with an arch shape and small side spoilers. This is a typical wing for the Stratus body, but it can be made to fit many different cars and race classes. Dimensions: Width 2.5" Depth .625"   Resin, 1/25 scale

41 Willys Pro Mod Body '05 1/24

The popular '41 Willys Pro Mod Resin Body. Features molded-in rear wing. The finish on the body is really smooth and crisp. Use Revell Pro Street Corvette Kit For Chassis.   One resin body 1/24 scale, by Competition Resins  

23 Pickup T Fuel Altered Body 1/25

 Includes: T Pickup Body Radiator Shell Front Wing              Photo of real T altered I have a one-piece 3D-printed Resin Chassis for this body. One resin body with included items as...

ET III Style Rear Wheels 1/25

ET III 'Bear Claw' style rear drag racing wheels. Popular in the '60's on street and drag machines.                         Photos of real wheels          ...

Mustang 2010-12 Pro Mod / Pro Stock Body 1/25

2010-2012 Mustang Pro Stock / Pro Mod Body. Kit includes: Hood Scoop Hood Scoop Blank Rear Wing Clear Headlight and Taillight covers I have a one-piece 3D-printed Resin Chassis for this body. One resin body with included items as outlined,...

Outlaw Super Cowl Hood Scoop 1/25

A raised 2-level hood scoop.   Molded in one piece. Contains 1 resin scoop, 1/25 scale.

Carbon Fiber Style Hat, Long 1/24

A round 3-hole hat that is typically seen in carbon fiber. This is a long version.  A shorter version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

PSI Blower 1/25

A PSI Blower in one-piece resin.For a 'roots' type blower, see the Kalbelco series of 671, 1471 and 1671 super chargers. This is a standalone blower - pulleys or other components are not included. Contains 1 resin blower by Competition Resins, 1/25 scale.

Carbon Fiber Style Hat, Short 1/24

A round 3-hole hat that is typically seen in carbon fiber. This is a short version.  A longer version is also available. Molded in one piece. 1/24 scale, by Competition Resins.

Cross-Ram Manifold & Carbs 1/25

A cross-ram & carburetor package.All items have locating pins for easy alignment. Consistis of: 1 Cross-Ram manifold 2 4bbl carbs 1 Air cleaner   1/25 scale by Competition Resins

Battery 1/25

A battery to start that mean engine! Dress it up with manufacturer's decals found here. Contains 1 resin battery, 1/25 scale, by Competition Resin

Dana 60 Rear End 1/25

A hard-core Dana rear end.      Photo of real Dana 60 by Moser                 Photo of a real Dana 60 by Strange     Contains 1 resin piece, 1/25 scale

GM 700R Transmission 1/25

A General Motors trick 700R automatic transmission. Contains 1 resin transmission, 1/25 scale

Pro Stock Style Fuel Cell 1/25

A Pro Stock type Fuel Cell. Contains 1 resin tank, 1/25 scale

Mustang Tear Drop Hood - Revell 1/25

A tear drop bubble that can be cut out and mounted on your hood or it's made to fit Revell's '65-'66 Mustang.   Here's an example of the hood on a 'Russ Davis Ford' Mustang.          Contains 1 resin hood,...

Pro Mod / Funny Car / Pro Stock Rear Wing 1/25

Includes main horizontal wing, sides and support rods. This wing can be made to fit many different race classes.   Here are some examples of what can be done.     Resin, 1/25 scale

Dual Nitrous , O2, Fire or Air Bottle Pair 1/25

Here are a pair of bottles that can be used for nitrous, fire, compressed air, oxygen, etc. Mount them in the interior, at the rear or ahead of the engine. Add a NOS decal found here, if this is the intended use for these bottles.  The 'small' size...

Pro Stock / Super Stock Drag Slicks 1/25

Drag Slicks for your Pro Stock, Super Stock or other race car.  Dimensions are listed below to see if they fit your needs. Each side of these tires will accept a different size wheel.                 ...

1471 Kobelco Blower 1/25

A 1471 Kobelco Blower in one-piece resin.The detail is quite good and the bolts are sharp. This is a standalone blower - pulleys or other components are not included. Check out this photo for an idea of which blower you need. Contains 1 resin blower.

Arden Heads with Valve Covers 1/25

For that Flathead engine - a pair of Arden heads with valve covers. The spark plug holes can be easily drilled. You can't tell by the photo, but ARDEN is spelled across the face. Contains 2 resin pieces.

Pro Stock Late Model Valve Covers 1/25

A pair of Pro Stock valve covers with a flat face. Contains 2 resin pieces.

Milodon Valve Covers 1/25

A pair of really nice Milodon valve covers with spark plug holes already drilled. These valve covers have horizontal grooves running lengthwise. They fit on a BBC engine. Contains 2 resin pieces.

Dual Plug HEMI Valve Covers 1/25

A pair of HEMI valve covers with dual spark plug holes already drilled. Contains 2 resin pieces.